Pinstripe source
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=28764
Printed Date: May-10-2024 at 2:27am
Topic: Pinstripe source
Posted By: tbeard
Subject: Pinstripe source
Date Posted: January-16-2013 at 9:27pm
|
I recently read a thread which had links to sources for pin striping materials. I have searched this site alot for the thread with no luck. The business had a wide variety of colors and great prices. Can someone point me to the link? I do remember there were 2 mabey 3 pin stripe businesses/links listed in the thread. ------------- Thanks.......Tom |
Replies:
Posted By: Morfoot
Date Posted: January-16-2013 at 9:46pm
|
Tom, Here is the website where I got the pinstriping for my truck when I repainted it to match the boat a few years ago. The pinstriping matched EXACTLY in color and size (1/2" & 1/4") so the left over stuff I have will be used on the boat as needed. http://store.gregory1.com/SCL.aspx?S40000" rel="nofollow - Boat Pinstriping Here's my rig:  ------------- "Morfoot; He can ski. He can wakeboard.He can cook chicken.He can create his own self-named beverage, & can also apparently fly. A man of many talents."72 Mustang "Kermit",88 SN Miss Scarlett, 99 SN "Sherman" |
Posted By: mark c
Date Posted: January-16-2013 at 9:53pm
|
These guys will make it for you, but the setup charges kill you for a single roll purchase. http://www.vinylstriping.com/multicolorrolls.html" rel="nofollow - Multi-Line Pinstripes |
Posted By: phatsat67
Date Posted: January-16-2013 at 10:18pm
|
Tom I can get you anything you want but nobody makes a double stripe as one piece with the correct pin stripe sizes. ------------- |
Posted By: phatsat67
Date Posted: January-16-2013 at 10:19pm
|
Morfoot I will look into carrying their products. ------------- |
Posted By: phatsat67
Date Posted: January-16-2013 at 10:22pm
|
Morfoot, I will look into carrying their product tomorrow. ------------- |
Posted By: tbeard
Date Posted: January-17-2013 at 2:22am
|
Thanks, I was hoping I could buy a roll with both the 1/2" and 1/4" together for easy of application. So I guess everyone is doing 2 individual steps.....One with the 1/2" tape and then apply the 1/4". Is that correct? ------------- Thanks.......Tom |
Posted By: mark c
Date Posted: January-17-2013 at 9:20am
| You can buy the single roll with both sizes on it in any of their standard colors at the place I posted above. They will make you a roll with a 1/2" stripe, 1/4" gap and 1/4" stripe. You can get both stripes the same color, or they can be different, but they charge a 65 dollar setup fee, and it gets pricey for a single roll, if it was spread out over 10 or so rolls it wouldn't be to bad. |
Posted By: Morfoot
Date Posted: January-17-2013 at 9:24am
|
Sounds good Zach...... Tom, Yes I applied the 1/2" stripe first using the straight line of the color change one the truck. I then cut several pieces of the 1/4" about an 1" long, butted them on top of the 1/2" spaced them down the side of the truck to use as spacers for the second stripe. My neighbor (jcamp72) helped me apply the second stripe as I started on the front and ran the 1/2 the length of the truck and he stuck the stripe to the vehicle. It worked better then I thought and wasn't that difficult. ------------- "Morfoot; He can ski. He can wakeboard.He can cook chicken.He can create his own self-named beverage, & can also apparently fly. A man of many talents."72 Mustang "Kermit",88 SN Miss Scarlett, 99 SN "Sherman" |
Posted By: phatsat67
Date Posted: January-17-2013 at 11:06am
|
Oops Tim, I misread your post and thought you said they come as a double stripe. Mark, what kind of money are we talking on the setup? I would like to stock something that would help people. ------------- |
Posted By: tbeard
Date Posted: January-17-2013 at 1:49pm
|
So my last resort is a 2 step process for pin stripes unless we find 2 stripe tape or I pay the set up fee:( I do not need the tape for a couple of weeks...in the mean time I will keep looking. Note: NautiqueParts.com has the double tape in Black and White but no Medium gray. Thanks Guys.. ------------- Thanks.......Tom |
Posted By: phatsat67
Date Posted: January-17-2013 at 2:01pm
|
Tom, Medium grey 1/4 inch 150' roll $ 13.40 the 1/2 goes up a bit at $26.20. They only sell the more common colors in the 150' rolls. Those prices are before the CCF.com 10% discount. ------------- |
Posted By: newscotty2001
Date Posted: January-17-2013 at 2:32pm
| I started a previous thread on this ('89 Pinstriping). I am also still looking for the med gray with the 1/4" and 1/2" on the same roll. Let me know if there is a group buy or if someone finds it elsewhere. Thanks. |
Posted By: mark c
Date Posted: January-17-2013 at 3:16pm
|
They say theres a 65 dollar charge on top of the roll prices, so a single roll of 1/2" and 1/4" with a 1/4" gap in their premium pinstriping material ends up costing around 120 bucks for a 150 foot roll, ($65 setup, $23 for 1/4", $29 for 1/2") and probably around 95 for their standard material (65 setup, 13 for 1/4", 15 for 1/2"). their standard vinyl is a 5 year outdoor life, premium is 7 year life. They come backed to maintain the spacing, you stick them on and then remove the backing from the tape after its positioned so the gap is maintained. Of course if someone orders 10 rolls (or 50 rolls) theres only one setup fee so it becomes more affordable. Maybe they will setup a commercial account with someone who can gaurantee some minimum order amount over a year. |
Posted By: phatsat67
Date Posted: January-17-2013 at 4:03pm
|
I will try to get in touch with them. I like the idea of the stuff being backed and not laid on clear vinyl to maintain the spacing. All depends on $$$$. ------------- |
Posted By: Mojo
Date Posted: January-17-2013 at 6:09pm
|
$65 bucks is way worth the headache of applying two thin stripes horizontal to one another IMO..... Moj' ------------- 05' SV211 TE 73' Martinique had:96' SNOB had:76' Nautique had 77 Tique |
Posted By: TX Foilhead
Date Posted: January-17-2013 at 6:58pm
| I'm good for a roll of the gray if someone orders some, just 4 or 5 rolls would make the price reasonable enough. |
Posted By: phatsat67
Date Posted: January-17-2013 at 7:12pm
|
Im thinking the same. I don't trust myself to get one straight let alone two. How much is Nautique parts getting for the black and white. ------------- |
Posted By: newscotty2001
Date Posted: January-17-2013 at 7:54pm
|
$45 for 150' http://www.nautiqueparts.com/accenttapepinstripe-doublepinstripe12x14-black.aspx Count me in for a roll of gray (or graphite/charcoal)if we can get it. |
Posted By: phatsat67
Date Posted: January-17-2013 at 8:20pm
|
Thanks. I would bet they had runs done from that company. Seems to be the only one willing to do doubles that large. The annoying thing is that Universal Products(who I get stripes from) Made the originals. I still have the UP part number but they won't make them... ------------- |
Posted By: tbeard
Date Posted: January-18-2013 at 4:30am
|
I like the Gray-Pewter-gunmetal look. Or something in that color range. Also agree with the comment about getting 1 stripe straight much less 4. 2 striptape is what we want....I am in for a med gray. ------------- Thanks.......Tom |
Posted By: phatsat67
Date Posted: January-18-2013 at 1:20pm
|
Just got in touch with Multi Line Stripes. They are working prices for an order of 10 150' rolls. Color does not change pricing so anyone can shoot me colors and I hope we can get the pricing down and I will make a little and save you a little. They initially didnt want to do any discounts on quantity pricing but I will see what I can work with them. ------------- |
Posted By: phatsat67
Date Posted: January-18-2013 at 2:45pm
|
Omit that last post I deleted if anyone saw it. Heres the skinny. If I order 10 of these roles (group buy pricing) don't actually need to sell all 10 rolls right now but if I can help anyone out I could get these to you for $78 a piece + shipping in any color you so desire. 150' rolls with proper spacing and tape sizes. ------------- |
Posted By: mark c
Date Posted: January-18-2013 at 4:00pm
|
Heres their colors incase anyone is interested. http://www.vinylstriping.com/colors.htm" rel="nofollow - Pinstripe colors Heres an image of them as well:  I'm assuming that this is in their standard colors? I'm good for a roll of light blue tape. (both stripes) |
Posted By: TX Foilhead
Date Posted: January-18-2013 at 4:49pm
| Which grade did you spec for that price? |
Posted By: phatsat67
Date Posted: January-18-2013 at 5:12pm
|
Standard for that price I believe. I will probably get a roll for myself as well. ------------- |
Posted By: newscotty2001
Date Posted: January-18-2013 at 6:37pm
|
Zach, Thanks for doing the research on this. I could live with gray, dark gray, med gray (only available in the premium), or even silver. FYI: At least on my '89, I know the original pinstripe is supposed to match the thinner accent stripe on the seats/upohlstry. Mine is a darker gray or graphite color. Anything close would be great. Like I said before, I will definately take a roll if you go forward with this. Thanks again |
Posted By: phatsat67
Date Posted: January-18-2013 at 7:18pm
|
Awesome Scott. They made me an "ok" deal but heck if I can save everyone 17 bucks and get a roll myself it must be worth it. ------------- |
Posted By: TX Foilhead
Date Posted: January-24-2013 at 7:53pm
| OK, I'm just about done with my engine teardown and I'm going to need something to keep me busy while I'm waiting on parts. Who all wants some stripes? I've already let Zach know what non original colors I want and some other people have done the same. Tell him what you want so we can get this going. |
Posted By: Air206
Date Posted: January-24-2013 at 10:36pm
I need tape for the Footer .... but I'm not bending the trend...staying with black, so I am out.  Althought silver sparkle like on the Air sure would look good....... ------------- https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206 http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot 78 SkiTiq |
Posted By: velde99
Date Posted: January-25-2013 at 2:35am
| a role is $78? 150'? |
Posted By: tbeard
Date Posted: January-25-2013 at 2:38am
|
Zach, Thanks for helping us out. I need 1 role of dark Gray P/N 95. Can I get the tape in a couple of weeks? :} ------------- Thanks.......Tom |
Posted By: velde99
Date Posted: January-25-2013 at 1:38pm
| How much is it per role? |
Posted By: phatsat67
Date Posted: January-25-2013 at 1:53pm
|
$78 rod. ------------- |
Posted By: phatsat67
Date Posted: January-25-2013 at 1:57pm
|
I will also need help from you guys if I have to order some stocking rolls. I would like to sell as many pre sold rolls as possible as I will be taking the risk of ordering blue or colors other than black based on what I think customers will need the most. I know you all want it fast but Lets take a week or so and grab guarnteed customers with order colors. I was thinking of switching it up a bit and doing a Dark gun metal metallic pinstripe and a dark gun metal metallic shadow on my new graphics ;). ------------- |
Posted By: Hollywood
Date Posted: January-25-2013 at 2:14pm
|
Weare going to need a few extra rolls to tape Pete's fingers together so he can't reply to any of this. ------------- |
Posted By: TX Foilhead
Date Posted: January-25-2013 at 3:16pm
|
Why would Pete worry unless your offing something that wasn't original? Seems to a few asking for the gray, I've never really paid attention to the stripes, they don't stand out much in pics. |
Posted By: tbeard
Date Posted: January-25-2013 at 3:17pm
Thats cool Zach as long as I get my dark Gray P/N 95 in a couple of weeks  Do you want me to pay up front? If so no problem you just need to spell out the plan. Thx......Tom------------- Thanks.......Tom |
phatsat67 wrote:Posted By: tbeard
Date Posted: January-30-2013 at 7:36pm
|
Zach, Can you provide the folks on the thread your thoughts about ordering the tape? Thanks......Tom ------------- Thanks.......Tom |
Posted By: phatsat67
Date Posted: January-30-2013 at 7:49pm
|
I would like to have more than 5 possible 6 or 7 orders Myself included.. Has anyone got the black tape from Nautique parts? I like the idea better of the double not having clear backing that stays with the stripes. The stuff on my boat now is black with a clear overlay and the clear is starting to shrink up and look bad. This could be prevented as the way they do it will just leave the two black stripes. ------------- |
Posted By: Hollywood
Date Posted: January-30-2013 at 7:51pm
|
I would definitely not be interested in having a clear backing stick around ------------- |
Posted By: tbeard
Date Posted: January-30-2013 at 8:00pm
|
No clear attached for my tape. I assumed it would be just like the factory tape. How many do you have now Zach? ------------- Thanks.......Tom |
Posted By: tbeard
Date Posted: January-30-2013 at 8:01pm
|
No clear attached for my tape. I assumed it would be just like the factory tape. How many folks plan to place an order at this point? ------------- Thanks.......Tom |
Posted By: phatsat67
Date Posted: January-30-2013 at 8:06pm
|
Just looked through the thred. Tbeard Phatsat67 Newscotty2001 TxFoilhead Hollywood Possibly Velde99 Lets see if we can rouse a few more! I can also check and see if they might make me 2 less rolls for the same price. Also the most common colors for the extra rolls taking suggestions. Maybe medium grey and bright blue? I have a customer bringing in an 87 footer for gel work and graphics so Im sure I could sell him on a roll. Another friend of ours just picked up a 89 yellow footer so thats a possibility too. ------------- |
Posted By: mark c
Date Posted: January-30-2013 at 8:27pm
|
You got me for a roll of the light blue number 84 (or the 1016 Olympic blue if it was the premium vinyl). |
Posted By: TRBenj
Date Posted: January-30-2013 at 8:33pm
I bet red would be amongst the most common... its used on many of the burgundy striped boats. ------------- |
Posted By: phatsat67
Date Posted: January-30-2013 at 11:49pm
|
Suggestions accepted! Mark I thought you already had yours because you suggested it! We might get this plan in action by weeks end. ------------- |
Posted By: mark c
Date Posted: January-31-2013 at 12:10am
| Nope, have two separate rolls of light blue, but I can't draw a straight line, let alone lay down 2 parallel ones in tape, so I would much rather have a single wider stripe with both stripes prespaced. Wider is easier to get on straight over long distances. It will go in the parts box until I finish getting the paint off the hull and the temp goes back up in the spring, but at least I'll have it on hand. |
Posted By: phatsat67
Date Posted: February-01-2013 at 11:42am
|
Tbeard Phatsat67 Newscotty2001 TxFoilhead Hollywood Possibly Velde99 Mark C If we can lets try and make this happen this next week. I know some need it sooner than others. ------------- |
Posted By: phatsat67
Date Posted: February-04-2013 at 11:15am
|
Got two more confirmed guys from our party this weekend. Tbeard Phatsat67 Newscotty2001 TxFoilhead Hollywood Mark C Terry M Teddy D Thats enough for me. You all can go ahead and submit final colors and call me with CC information. I will take a deposit for the special order and bill shipping seperately when the parts come in. ------------- |
Posted By: Hollywood
Date Posted: February-04-2013 at 12:03pm
|
#68 Standard tomato red. Don't want to hold up the order. Ill call you maybe. ------------- |
Posted By: 75 Tique
Date Posted: February-04-2013 at 12:44pm
 ------------- _____________ “So, how was your weekend?” “Well, let me see…sun burn, stiff neck, screwed up back, assorted aches and pains….yup, my weekend was great, thanks for asking.” |
Posted By: phatsat67
Date Posted: February-04-2013 at 2:46pm
|
I will take everyones CC info but will not run the transactions until the order is finalized with all colors. ------------- |
Posted By: phatsat67
Date Posted: February-20-2013 at 3:30pm
|
Only have 2 CCF guys confirmed with Credit Card info? Everyone still want to make this happen? ------------- |
Posted By: newscotty2001
Date Posted: February-25-2013 at 7:17pm
| Any updates? I got my Credit Card info to Zach a few weeks ago. Let's get more confirmed so Zach can make this happen. |
Posted By: TX Foilhead
Date Posted: February-25-2013 at 7:33pm
| I talked to him the end of last week and he had enough orders so hopefully we'll see them in a few weeks. |
Posted By: phatsat67
Date Posted: March-04-2013 at 7:43pm
|
On hold. I may have found a source that can do these sets much cheaper. I will have the contact info tomorrow and will either go that way or place the order at the current cost. ------------- |
Posted By: audiodude
Date Posted: March-05-2013 at 11:26am
|
Has anyone checked out this source: http://greatlakesskipper.com/category-1/40_41-boat-decals-pinstriping-and-graphics-pinstripe-decals.html ------------- 1989 Correct Craft 2001 In the words of Milton Berle: "You can lead a man to Congress but you can't make him think" |
Posted By: phatsat67
Date Posted: March-05-2013 at 12:40pm
|
This place is supposedly near my lake cabin and can do it much cheaper. I should know today and order either direction. ------------- |
Posted By: phatsat67
Date Posted: March-06-2013 at 1:19pm
|
Contacted the new company today hopefully I will know cost and if it's less place order. ------------- |
Posted By: newscotty2001
Date Posted: March-06-2013 at 6:32pm
| Do they have the same colors as the other place? I was originally looking for the medium gray, but it was only available in the premium vinyl. Is there a color chart for the new source? |
Posted By: phatsat67
Date Posted: March-07-2013 at 5:04pm
|
I have a new color chart on the way!!!! I hope they all match up I cant imagine them being much different. Looking like if the colors match for non metallic colors were at about $45.00 a 150' Roll!!!!!! ------------- |
Posted By: phatsat67
Date Posted: March-20-2013 at 4:13pm
|
Ok, Finally got the color chart from the new supplier. They have a massive ammount of colors to choose from. I pictured a few so we can all decide which is the most correct. Should be right at 48 a roll. Metallic makes it more but the two color stripes should stay the same. Tried to get the names and numbers visible in the pictures.        ------------- |
Posted By: Hollywood
Date Posted: March-20-2013 at 4:27pm
|
nice job, too many to chose from now! Anyone with a Burgandy 88 with the red pinstripe/secondary interior stripe please chime in. I am leaning towards tomato 304. ------------- |
Posted By: phatsat67
Date Posted: March-20-2013 at 4:36pm
|
I'm pretty sure Bay Blue will be the best alternative to Pacific blue. I can't find my UP chart at the moment. Anyone with grey chime in. I'm not sure which shade of black to order ;). The two reds against the hull of the 13 G23.  ------------- |
Posted By: TX Foilhead
Date Posted: March-20-2013 at 5:22pm
| Firemist Silver looks sort of like the Medium Gray from the last one with sparkles is that right? |
Posted By: dochockey
Date Posted: March-20-2013 at 5:35pm
|
Can you put all the blacks together? ------------- 1989 Teal Ski Nautique 1967 Mustang Harris Float Sunfish |
Posted By: TRBenj
Date Posted: March-20-2013 at 5:39pm
|
Dove gray looks like the single 1/2" pin used between the red and black stripes on my '90... not sure if they ever used the lighter gray in a double pin on the 2001 though? I think the Ruby or Dark red is closer to the pin used on the burgundy/gray boats. I assume the same color was used on some burgundy/white boats. Do they have anything darker than Medium Gray? There was a darker gray used on some of the burgundy boats as well (like TBeard's). Bay blue looks pretty good! ------------- |
Posted By: MartyMabe
Date Posted: March-20-2013 at 6:06pm
|
No PINK !??? ------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out! |
Posted By: Hollywood
Date Posted: March-20-2013 at 6:07pm
I need to match the lightning bolt outline. I feel like it's a bit lighter than the vinyl. Zach, if there aren't any near you send them to me I'll match it up. SNobsessed is the same color scheme. ------------- |
Posted By: phatsat67
Date Posted: March-20-2013 at 6:33pm
Metallic looks more pronounced in person.  Reds from orange most to darkest.  ------------- |
Posted By: newscotty2001
Date Posted: March-20-2013 at 8:10pm
I have light grey on my '89, however I don't think this is original. I believe the pinstripe should be the same color as the third accent stripe on the original upohlstery, so I was thinking of switching to something darker. Med. grey looks to be the closest, but the boat is still in storage, so I can only compare to pictures. |
Posted By: Swatkinz
Date Posted: March-20-2013 at 9:04pm
|
Zach, Can you send me a snippet of cardinal and tomato red? Unless you know what the red on my 88 would be closest too, I just can't tell. Also, need your shipping address so that I can send this dash template to you. Nice job, BTW, on getting this pinstriping source. I'm about 2-3 weeks away from really "needing" mine ------------- Steve 2011 Sport/Air 200 Excalibur 343 2017 Boatmate Tandem Axle Trailer Former CC owner (77, 80, 95, 88, all SNs) Former Malibu owner (07, 09) |
Posted By: phatsat67
Date Posted: March-21-2013 at 11:21am
|
I'm thinking MED grey. I have a bunch of original suff but thats 20+ years old so I'm sure the color has changed slightly over that time. I think Med grey is the closest we are going to get. I think I would rather be one shade off and pay 48 bucks and not 93 like the other place charges for an individual roll. I'm going to say Cardinal for the red because the tomato IMHO is a bit too orange? I'm going to try to find my UP chart today to compare. ------------- |
Posted By: mark c
Date Posted: March-21-2013 at 12:19pm
| What about the blues? Is the bay blue, the lightest they have, but it seems a bit darker than the code 84 light blue from the other supplier, could be my monitors though. Is the roll you have with it, original from (or used by)CC? |
Posted By: dochockey
Date Posted: March-21-2013 at 12:23pm
|
Can u put twilight black, gloss black, coal met, and galactic grey next to each other? ------------- 1989 Teal Ski Nautique 1967 Mustang Harris Float Sunfish |
Posted By: Hollywood
Date Posted: March-21-2013 at 12:30pm
|
There is only one actual "black". Should be pretty obvious. ------------- |
Posted By: phatsat67
Date Posted: March-21-2013 at 1:13pm
|
I was just joking about the blacks. The other names are various types of metallic. Pretty cool looking if thats what you want. Bay blue seems to be the only option from them. The stripe set I had in my hand is original but as I said I can't imagine it is the exact same color as when it was new being 20+ years old. I will lay all those blacks together if you want? ------------- |
Posted By: phatsat67
Date Posted: March-21-2013 at 2:07pm
|
Still have the option of 78 a roll for you guys if we all decide to go that route. But we have to order atleast 10 of those. I want to stock the common colors in these because it is soooooo much cheaper for a roll. ------------- |
Posted By: mark c
Date Posted: March-21-2013 at 3:06pm
| Well bay blue it is then, you've got my card info whenever the order goes in, I'm good for a roll along with the shift knob we talked about. No rush, If mine sees water this year it will be probably be from rain. |
Posted By: td_in_nc
Date Posted: March-30-2013 at 12:23am
| Jumping in late but is it still possible to order a roll? |
Posted By: Bones71
Date Posted: March-30-2013 at 2:31am
| I would also like to get my hands on a roll of a warm grey for a 89 ski nautique. how can we get together on $$ and ordering. I looked everywhere for this stripe and can't find it. Any information would be appreciated and am willing to send payment to you guys. Am i too late?Thanks, Tony L. |
Posted By: newscotty2001
Date Posted: April-16-2013 at 9:37pm
Zach, Just wanted to see what the status of this project is. Are you going to stock some of the more common colors or do we need to order individual rolls? I already gave you my credit card info, but I have been to busy to follow up. I'm looking for the Medium Gray. Let us know. Thanks again for coordinating this. Scott |
Posted By: Bones71
Date Posted: April-16-2013 at 11:54pm
|
Scott, I know Zachary placed the order and what he told me was he would'nt charge me till he got them in. Thought you would like to know. I also asked for the grey. Bones. |
Posted By: phatsat67
Date Posted: April-18-2013 at 4:49pm
|
Should have all yall's pin stripes in my possession tomorrow. ------------- |
Posted By: Bones71
Date Posted: April-18-2013 at 8:16pm
Saweeet! 
|
Posted By: phatsat67
Date Posted: April-19-2013 at 3:38pm
 Looky there! They had a shortage on the Bay Blue rolls so they will be here next week for any of you who ordered those. I'm hungry and it's lunch time so you all should be getting some confirmation emails from me when I get the costs figured out. The metallic a slightly hugher but still way cheaper than the other company. ------------- |
Posted By: newscotty2001
Date Posted: April-25-2013 at 3:25pm
|
Got mine yesterday. Color is perfect. Thanks Zach! Now I just need to find the time to do it. |
Posted By: velde99
Date Posted: May-23-2014 at 2:31am
|
Zach Looks like I am a year late to the party. I am guessing the excel had "pacific blue" now you recommend bay blue. 1/4 and 1/2 next time you order, also the grey single 1/2" Dove grey I think you said. |
Posted By: TX Foilhead
Date Posted: May-23-2014 at 2:37am
| I want some more, put me down for another roll when you order more. |