Correct spark plug & HT leads
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=28887
Printed Date: November-24-2024 at 9:49pm
Topic: Correct spark plug & HT leads
Posted By: gR@HaM
Subject: Correct spark plug & HT leads
Date Posted: February-02-2013 at 3:04pm
My 351w needs new leads and spark plugs  would the following be suitable:http://item.mobileweb.ebay.co.uk/viewitem?itemId=170770876665&index=4&nav=SEARCH&nid=15542324981" rel="nofollow - HT leads http://item.mobileweb.ebay.co.uk/viewitem?itemId=350599744131&index=0&nav=SEARCH&nid=50135702806" rel="nofollow - Plugs Thanks ------------- '82 Ski Tique |
Replies:
Posted By: phatsat67
Date Posted: February-02-2013 at 3:58pm
|
Those wires may not be long enough if they are for an auto applicaion. Autos come down and over the valve covers and marine hang under the manifolds. ------------- |
Posted By: gR@HaM
Date Posted: February-02-2013 at 4:10pm
|
Thanks Zach. I'm looking to source some locally, any suggestions as to a particular automotive V8 that I could search for to get the correct length leads? ------------- '82 Ski Tique |
Posted By: SNobsessed
Date Posted: February-03-2013 at 12:02am
|
I bought a set for a early 80's F150 (351 engine) & they were a little too long. I cut several leads back. The store had spare terminals in stock for the customizing. Just FYI. ------------- “Beer is proof that God loves us and wants us to be happy.” Ben Franklin |
Posted By: gR@HaM
Date Posted: February-05-2013 at 7:48pm
|
I've emailed the company for measurements. Regarding the spark plugs, can anyone confirm whether they are suitable before I buy? Thanks ------------- '82 Ski Tique |
Posted By: SNobsessed
Date Posted: February-05-2013 at 8:33pm
|
Autolite #24 is what I have been using - can you get those? ------------- “Beer is proof that God loves us and wants us to be happy.” Ben Franklin |
Posted By: gR@HaM
Date Posted: February-06-2013 at 4:38am
Not in the UK I've looked everywhere  ------------- '82 Ski Tique |
Posted By: gR@HaM
Date Posted: February-11-2013 at 8:52pm
|
Here are the figures the guy sent me, will have to temporarily refit my manifolds and do some measuring. Unless anyone happens to know the correct lengths already? It's a long shot I know! 710 810 700 410 690 580 690 820 Coil 460 ------------- '82 Ski Tique |