Print Page | Close Window

Running boat on water hose

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=28893
Printed Date: May-10-2024 at 6:40am


Topic: Running boat on water hose
Posted By: ricofrancois
Subject: Running boat on water hose
Date Posted: February-03-2013 at 2:50am
Hi, I was wondering if the T fitting on my boat is for connecting a hose to run the boat off the lake.




-------------
Ski Nautique 97 - GT40 EFI



Replies:
Posted By: Waternut
Date Posted: February-03-2013 at 3:27am
Most likely. Kind of looks like it's been run in salt water which would reaffirm the flush fitting requirement.

-------------


Posted By: 8122pbrainard
Date Posted: February-03-2013 at 8:44am
That is a swivel 3/4" GHT thread adapter on the plugged side of the tee. It was set up for running or flushing the engine out of the water. However, for better flow, I would have installed the tee so the supply of water is directed towards the engine and not the strainer and supply.

-------------
/diaries/details.asp?ID=1622" rel="nofollow -

54 Atom

/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique

64 X55 Dunphy

Keep it original, Pete
<


Posted By: ricofrancois
Date Posted: February-03-2013 at 4:02pm
@Waternut the boat was only in fresh water.

@8122pbrainard I agree with you, the T should be the other way around. I was thinking about adding a brass valve for easy flush and service.

-------------
Ski Nautique 97 - GT40 EFI


Posted By: 8122pbrainard
Date Posted: February-03-2013 at 4:40pm
Originally posted by ricofrancois ricofrancois wrote:

@Waternut the boat was only in fresh water.

@8122pbrainard I agree with you, the T should be the other way around. I was thinking about adding a brass valve for easy flush and service.

The valve is not needed. Many here have used Tim's set up without valving. The RWP will suck enough. When the engine isn't running, the water will go out the through hull pick up. One danger of the valve is forgetting to open it when you put the boat in the lake!!

-------------
/diaries/details.asp?ID=1622" rel="nofollow -

54 Atom

/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique

64 X55 Dunphy

Keep it original, Pete
<


Posted By: ricofrancois
Date Posted: February-07-2013 at 3:26am
upgraded flush



-------------
Ski Nautique 97 - GT40 EFI



Print Page | Close Window