Sport Nautique Guard Rail
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=28904
Printed Date: February-13-2025 at 12:15pm
Topic: Sport Nautique Guard Rail
Posted By: watercraft
Subject: Sport Nautique Guard Rail
Date Posted: February-05-2013 at 2:14pm
  
|
Replies:
Posted By: Foot_Fungus
Date Posted: February-07-2013 at 2:47am
|
hmm would this fit a 94, been looking for a replacement for a few months. ------------- '94SN Restoration underway... |
Posted By: watercraft
Date Posted: February-07-2013 at 12:54pm
| very possibly, i indicated 92-93 because it is written on the parts tag. |
Posted By: TRBenj
Date Posted: February-07-2013 at 1:04pm
|
Dont forget that CC curved the transom pretty significantly for '94, whereas 90-93 was pretty flat. I suspect that grab handle might not interchange without modification. ------------- |
Posted By: watercraft
Date Posted: February-07-2013 at 1:17pm
| I'm still learning a lot about the 90's models. This says specifically 92-93 SN, so if yours has the rounded back, it is a safe bet that it wouldn't fit. I thought that design change came later. Thanks for the info! |
Posted By: TRBenj
Date Posted: February-07-2013 at 2:16pm
|
94-96 SN's got a gradual curve on the transom (and elsewhere on the deck), whereas the 90-93 boats were flatter and had harder creased edges. 1990:  1995:  Not to be confused with the bubble but TSC SN's (1997-2001). Of course, this may be a moot point if the rail in question is for a Sport as you indicated in the thread title, as all 93-97 Sports should be the same (also a rounded transom like the 94-96 Ski's). Id be surprised if the same part could be used on the 89-92 Sports though, as those transoms were flat like the 90-93 Ski's. Then again, maybe the transom curve is gradual enough that it may fit all of the above?  Pretty sure they didnt start putting them on boats until '91 or '92.------------- |
Posted By: Foot_Fungus
Date Posted: February-08-2013 at 1:45am
|
So Time you're saying that if that handle is for a 92-93 sport it should fit my regular 94 SN? If thats the case I'm interested depending if you're firm on $70 or not. ------------- '94SN Restoration underway... |
Posted By: watercraft
Date Posted: February-08-2013 at 12:40pm
|
This unit looks like the center post is mounted a little behind the 2 sides, like if i mounted it to a flat surface, the center post would not mount flush. As far as the $70, make an offer. I also will not stick you with a part that doesn't fit. If you find for some reason it doesn't mount up I have no issue with refunding your costs. |
Posted By: Florida Inboards
Date Posted: February-08-2013 at 1:08pm
They also look great with the powdercoat removed and the stainless polished out! ------------- Money Talks! BS Walks! and loose change rides the bus!!! |
Posted By: N2Deep
Date Posted: February-09-2013 at 12:12am
|
If he doesn't take it I will take it - It should fit my 91SN- it didn't come with one but have wanted to add it. Just waiting for one to pop up. Thanks, Craig ------------- 1991 SN pulled by a 2010 Tundra |
Posted By: Foot_Fungus
Date Posted: February-10-2013 at 1:13am
|
have at it n2... ------------- '94SN Restoration underway... |