4sale66Mustang,whole or parts
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=290
Printed Date: November-27-2024 at 5:45am
Topic: 4sale66Mustang,whole or parts
Posted By: DrCC
Subject: 4sale66Mustang,whole or parts
Date Posted: April-12-2004 at 1:36am
| Parting out my 1966 Mustang. Stopped using in 1992 due to motor stringers. I have mostly all the original parts. Engine is not original-1975 302ci OMC 275hrs. I have the 2 and 4 barrel carbs and intakes. 4 has a wedge,2 has no wedge. AS1-71C Velvet Drive. Other parts- 2 bottom fins for Nautique-sold, white face Airguide Tournament speedo-sold, Single Morse control shift-throttle, extra Teleflex T-Helm w-chrome bezel-sold, custom fit Teak Swim platform,no brackets-sold. |
Replies:
Posted By: Guests
Date Posted: April-12-2004 at 3:44pm
| Do you have a trailer? How much for speedo? |
Posted By: Guests
Date Posted: April-12-2004 at 3:45pm
| Actually how much for the whole thing? |
Posted By: Guests
Date Posted: April-13-2004 at 12:59am
| The trailer, I believe is original, but somehow before I bought it, it wound up with a homemade title. It has new wheels and tires, new hubs and bearings, new lights, new tounge jack. 1800.00 would take the whole package plus all other parts. |
Posted By: Guests
Date Posted: April-13-2004 at 12:40pm
| Ok, 1600.00 |
Posted By: JrCC
Date Posted: April-13-2004 at 10:55pm
What about the Correct Craft emblem’s I need one more.
"O" ya and the ski pylon do you have that also. |
Posted By: scott
Date Posted: April-14-2004 at 2:02am
|
Any pictures? Thanks. ------------- 1971(I think :-) Skier |
Posted By: Guests
Date Posted: April-15-2004 at 3:06am
|
Original parts;
bow light Lifting rings front vent windsheild (Taylor made,plexiglas) Horse w/"MUSTANG" chrome steering wheel Aluminum guage panel (guages are later model teleflex) Ski Pylon Motor Box w/handle & vent (hinges updated to quick release pin type) 1 1/4" rub rail moulding "Correct Craft" emblems Strut/Rudder 2 1/2" Stainless Exhaust w/rings Fuel guage window w/ring Stern light base The hull was originally "Champaine" it was re-gel coated (not painted) in 1985 to an "Off White" color. |
Posted By: kenny g
Date Posted: April-15-2004 at 10:34am
|
DRCC i would be interested in parts only.
how can i contact you ? ------------- kenny g |
Posted By: JrCC
Date Posted: April-15-2004 at 3:10pm
|
I would like to get those CC emblems and talk to you about the ski pylon.
It’s my birthday this weekend turning 26 yrs I would like to get those Correct Craft emblems, a gift to myself what’s your price. Call any time # (805) 310-1191 
|
Posted By: ScottZ
Date Posted: April-15-2004 at 3:19pm
|
I'll take the 2 metal Correct Craft emblems 1 of your center bottom fins, white face speedo (if surface mount) and your 2 lifting rings. I have a 1964 Ski Nautique I am currently restoring. Please give a price on these items. I can be reached at 1-877-201-4296.
Thanks. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: tstafford
Date Posted: April-24-2004 at 7:39pm
|
How much for the steering wheel? ------------- Trevor 1968 Mustang |
Posted By: Guests
Date Posted: April-30-2004 at 12:22pm
|
DrCC wrote:Posted By: Guests
Date Posted: April-30-2004 at 12:23pm
| I am looking for a windshield and gauge panel for a 1966 mustang. |
Posted By: Guests
Date Posted: April-30-2004 at 3:15pm
| I am interested in a windshield for a 1966 mustang correct craft. |
Posted By: Barracuda
Date Posted: April-30-2004 at 7:12pm
|
Do you still have the ski pylon?
Does anyone have a used ski pylon that will fit a 65 Barracuda? Thanks -Brad |
Posted By: JrCC
Date Posted: April-30-2004 at 8:44pm
Brad I am looking for a ski pylon also, its for my 69 Barracuda. I have yet too be contacted by Mr. DrCC with the parts he has for sale. I would like to complete my boat for the summer.
|
Posted By: zinfandel
Date Posted: May-03-2004 at 8:36pm
|
DrCC,
Do you still have the windshield for the 1966 Mustang? |
Posted By: 64 Skier
Date Posted: May-16-2004 at 7:43am
|
DRCC,
Did you say you still had the aluminum exhaust manifolds. Send a picture to mark.blanche@dvncl.com ------------- 64 Skier 66" HO VTX and 67" HO Triumph http://www.correctcraftfan.com/diaries/details.asp?ID=1071&sort=&pagenum=3&yrstart=1971&yrend=1975 - 71CC |
Posted By: 77stang
Date Posted: May-20-2004 at 8:44pm
| i cant tell if you have reached a buyers and sellers accord. if not, id like to buy the horse emblem. would you accept a $30 offer plus shipping? |
Posted By: ScottZ
Date Posted: May-21-2004 at 7:07pm
|
Where is DrCC?
We have heard from him since he advertised these parts. Does anyone know if he has sold them all?  ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: JrCC
Date Posted: May-25-2004 at 4:44pm
I have allso yet to be contacted. I hope every thing is ok with him.
|
Posted By: 67nautique312
Date Posted: June-23-2004 at 7:25pm
|
Is the motor cover the fiberglass W/ hood scoop style? If so i want it!!! Also i would like one of the correct craft emblems and teak swim platform!! Does the swim platform fit the 66? PLEASE LET ME KNOW Im almost complete with the restore!
Thanks a ton!!!!
I hope You havent sold it yet!! I can be reached at (913) 219-3402 Please let me know!!
|
Posted By: incorrect
Date Posted: June-28-2004 at 4:47pm
|
hey
what is the price for the teak platform, also any additional info is appreciated ------------- incorrect |
Posted By: Big Jim Slade
Date Posted: July-12-2004 at 5:45pm
| Looks like a variety of people have inquired about the parts for sale. I read through your list and am curious about your throttle control. My 69 Mustang has a gas pedal and separate shifter up on the dash. I'm looking for the original Morse hand controlled throttle to replace my gas pedal. Was this a part you had for sale? I might also be interested in your motor cover hinges as these are a little hard to come by. Let me know what's still left if there is anything. |
Posted By: 69mustang
Date Posted: July-22-2004 at 1:59pm
| I would like to bid on the Pylon. |
Posted By: 69mustang
Date Posted: July-22-2004 at 1:59pm
|
I would like to bid on the pylon
|
Posted By: Murray
Date Posted: July-28-2004 at 1:54am
|
I could use the engine and tranny. Let me know if you still have it the price and condition.
mark ------------- MEM |
Posted By: sunnys
Date Posted: September-22-2004 at 2:37am
|
interested in the morse throttle control and the cutout on the transmission to not allow it to start in gear. Do you still have these parts, can you email pictures?
Thanks |
Posted By: Jim_In_Houston
Date Posted: September-22-2004 at 6:48pm
| I want the front seats!!!!! |
Posted By: windy plummer
Date Posted: November-20-2004 at 4:50pm
|
do u still have the platform?if so e-mail windmillwindy@hotmail.com ------------- windy plummer |
Posted By: Guests
Date Posted: January-09-2005 at 2:19am
| Are there any parts still available? Interested in gauges, side vent windows with hardware, front and rear light with flags. |
Posted By: Guests
Date Posted: January-23-2005 at 12:28am
|
Posted By: Guests
Date Posted: January-23-2005 at 12:34am
|
Posted By: Jim_In_Houston
Date Posted: January-23-2005 at 11:29am
|
Has Dr.CC disappeared? I'll buy the whole boat and strip it down for everyone if he is too busy. Email: jim@drivesys.com ------------- Happy owner of a '66 and a '68 Mustang |
Posted By: Guests
Date Posted: January-24-2005 at 12:47pm
| Jim, I will contact you by e-mail. I want to sell. Sorry I have been so hard to contact. |
Posted By: 68 Mustang
Date Posted: February-17-2005 at 11:40pm
|
How much for the swim platform? I have a 68 Mustang. I think the hull is the same. ------------- 68 Mustang |
Posted By: Guests
Date Posted: February-21-2005 at 2:27am
| Dr CC. I did not get your email. Please try again. I have your money in my pocket. jim@drivesys.com |
Posted By: 66CorrectCraft
Date Posted: March-04-2005 at 7:58pm
|
Dr CC - Do you still have parts available or am I too late? I am interested in the swim platform.
|
Posted By: 1969cc
Date Posted: March-06-2005 at 1:38pm
|
Looking for Teleflex Temp gauge. Do you have any original gauges left and can you send a picture?
|
Posted By: Guests
Date Posted: April-29-2005 at 11:10pm
| I am in need of a steering cable and dash mounted shift lever. If available, what would be the cost? My zip code is 03245 (Holdernes NH). Thanks. |
Posted By: willieb
Date Posted: May-05-2005 at 3:10pm
| do you still have the mustang/horse bezel on the console? and if so how much do you want for it? |
Posted By: willieb
Date Posted: May-05-2005 at 3:14pm
|
Posted By: Guests
Date Posted: May-28-2005 at 9:09pm
| I would like to buy your windshield , tow bar , gauge cluster , and swim platform , I have a 1969 mustang , you can call me at 843-358-1269 or e-mail keithfrustsrjr@yahoo.com |
Posted By: Tonali_III
Date Posted: June-26-2005 at 5:35pm
|
Do you still have the Morse control? ------------- http://correctcraftfan.com/diaries/details.asp?ID=553&sort=&pagenum=1" rel="nofollow - 1974 Southwind 20 <a href="http://www.correctcraftfan.com/diaries/details.asp?ID=6752" rel="nofollow">1972 Mustan |
Posted By: Atmspltr
Date Posted: June-29-2005 at 2:29pm
|
If you still have parts....how 'bout the motor box and do you have any front seat brackets?
Robert_Bracey@Dom.Com |
Posted By: tleed
Date Posted: July-04-2005 at 12:24pm
|
Was that a 318 and do you have manifolds? I could use a passenger side manifold. Mine was cracked and welded. It holds fine, but looks like junk.
Thomas |
Posted By: hhusker
Date Posted: July-06-2005 at 12:39pm
| I can't tell through these posts if the trailer was sold. Can you please let me know if it is still available and if so, how much you are asking? Thanks |
Posted By: nautique frk
Date Posted: July-06-2005 at 7:03pm
|
Who knows if this guy contacted anyone about their wants for parts , This post has been going on for so long . Just answer some one if you still have the boat or any parts .
Mike |
Posted By: Guests
Date Posted: July-18-2005 at 2:34am
| i'm looking for a windshield, back seat and engine cover |
Posted By: tombo
Date Posted: July-18-2005 at 10:56pm
|
i'm looking for a windshield, back seat,and engine cover ------------- tombo |
Posted By: Guests
Date Posted: August-10-2005 at 9:54pm
| Are parts are still available? |
Posted By: Guests
Date Posted: October-08-2005 at 11:55pm
| Do you still have any parts left? Like the steering wheel,side vents?iS IT A 2-SPOKED WHEEL?Thanks,Marty Mabe Vikings425@cs.com |
Posted By: scott8370
Date Posted: January-04-2006 at 7:14am
do you still have lift rings? how much $$. what style? Thanks ------------- Scott |
Posted By: mmurray
Date Posted: January-04-2006 at 3:00pm
|
I am interested in the motor and tranny, how much and where is it located.
Mark Murray ------------- mmurray |
Posted By: mmurray
Date Posted: January-04-2006 at 3:15pm
|
I am interested in the motor and tranny, please contact me if it is still avaliable.
Mark markemurray4@hotmail.com ------------- mmurray |
Posted By: fredo68
Date Posted: April-19-2006 at 9:34am
|
drcc
if you still have motor and tranny for mustang id be interested how much where are you and any other info you have fredo68 ------------- fredo68 |
Posted By: DrCC
Date Posted: May-07-2006 at 8:38pm
|
Sorry guys for procrastinating so long. The motor box-SOLD. The engine w/velvet drive-$1200.00 firm, $700.00 ea. if separated.
#2 Trailer-$500.00 I might consider a 200 mile delivery with the trailer. Lift rings-$90.00 pair, shipped. Windshield-$150.00 (curved 1pc plexi) it's not the 2pc w/vent wings. SOLD Steering wheel-$45.00 4-spoke plastic- original-SOLD Morse control-$80.00 includes shipping Pylon-$150.00 39" Sold Guage panel-$30.00 MUSTANG w/horse-$35.00-SOLD Bow light original-$20.00-SOLD Stern light-complete original w/flag-$45.00 Sold Platform -150.00 SOLD Gotta go for now. I'll try an answer more questions later tonight. Thanks. |
Posted By: DrCC
Date Posted: May-08-2006 at 10:33am
|
I'm still looking for the shift lever, when I find it, I'd take $10.00 p/s.
Gas pedal-$20.00 Back to the engine, It's a '75 OMC 302 Ford with very low hours. I'm guessing around 275 hrs. - 280 hrs. It's been sitting on my patio, covered up since 1991. It's been hooked up to gas,water & battery and run every summer. It's a 2 barrel 175 hp. I have the 4 bbl. intake and carb, but the 4 bbl. carb needs some parts. Engine's ready to drop in and go! |
Posted By: Jim_In_Houston
Date Posted: May-08-2006 at 11:10am
|
I'll take the gauge panel, front seats, and possible the whole boat and trailor. I can be in Missouri in two weeks and look at the boat if that's OK. Let me know. jim@drivesys.com ------------- Happy owner of a '66 and a '68 Mustang |
Posted By: DrCC
Date Posted: May-09-2006 at 2:01pm
|
Jim,
I don't have the original front seats. I have 2 swivel pedistals and one fiberglass bucket. I'll send you an e-mail right now. Thanks AT |
Posted By: DrCC
Date Posted: May-09-2006 at 2:14pm
| Keith, I tryed calling you, but that no. is not working. Thanks |
Posted By: cameo3145
Date Posted: May-09-2006 at 2:26pm
| DrCC I will take the bow light if you still have it THanks Bill 513-615-1333 |
Posted By: scott8370
Date Posted: May-09-2006 at 9:31pm
|
cameo3145
Do you live close to me. I live in Mason Oh. ------------- Scott |
Posted By: DrCC
Date Posted: May-10-2006 at 11:15am
|
Scott8370,
I still have the lift rings. They are the tear drop shaped ones. The longer point faces back with just a slight point in the front. If your still interested just let me know. 90.00 pair. Bill, has dibbs on the bow lt. Markmurray, I'll send you another email. Keith, I'll send you an email. Tony J., I still have the Morse control. Gordon, I'm still looking for the shift lever. (I'll look a little harder today) Tombo, Still have the windsheild. It's the one piece plexiglass from Taylor Made Prod. The rubber deck piece is broke. But, they are still available from a Taylor Made Dealer. They call it White Twin-Flap Vinyl Deck Channel. Thanks guys! |
Posted By: DrCC
Date Posted: May-10-2006 at 11:20am
| ScottZ has dibbs on the keel fin. I'll call you this afternoon. Thanks Again |
Posted By: captinr
Date Posted: May-10-2006 at 1:54pm
|
Alan,
There is a '67 Mustang just listed for sale. There is a good shot of the steering wheel in the listing. If the wheel you have for sale is the same style, I will have to pass on this one. Thanks for the offer Rodney |
Posted By: 66wldcat
Date Posted: May-10-2006 at 1:55pm
|
hey, do you have any of the guages, steering wheel, cc emblems still? If so how much for them ------------- Anthony |
Posted By: DrCC
Date Posted: May-10-2006 at 3:02pm
|
Rodney, The spokes on mine are longer, and the rectangle in the center is alot smaller.
The one I have is exactly like the one in the 1968 brochure-Extra photo-Mustang (3) http://i54.photobucket.com/albums/g96/DrCC-74/66wheel.jpg 66wldcat, Don't have any of the original guages, what I do have are from the late 70's- early 80's Teleflex. Black bezel. Emblems-SOLD to JrCC. |
Posted By: 67nautique312
Date Posted: May-11-2006 at 4:00pm
|
drcc,
This is paul here, I'm the one who bought the motor cover from you for my classic.. There are pics of it on the general discussion page if you want to see how it turned out? I posted a topic for it. Also just wandered if you still had the swim plattform or not? Let me know, Paul, ------------- 1963 Classic (handed down to my daughter) 67 Riviera 68 barracuda 1971 Ski Nautique Promo 86 Silver Nautique 1995 Ski Nautique |
Posted By: DrCC
Date Posted: May-11-2006 at 5:57pm
|
Paul,
I've seen the pics. A couple of weeks ago I was getting curious to see if you had it painted and posted pics yet. So I went searching for your Classic, and there they were in all it's Red and White glory! Looks great! I do still have the swim platform. Remember the splices in two of the long sections? You could probably fix that. I need help with posting pics. Is Photobucket the way to go? Thanks AT |
Posted By: 67nautique312
Date Posted: May-12-2006 at 11:31am
|
Drcc,
Yea!! There is a link on this site that you can go to and sign up. It's pretty easy! If i can do it i know you could!! I'm still learning how to work the photo bucket thing a little bit at a time..... Save that plattform for me!! and if the trailer is still there i might want it also? Can you send me some photos of the trailer?(if you still have it) I forgot what kind of shape it's in? Is it the original trailer for that boat?If you dont want to mess with photo bucket just take a picture with a digital camera if you have one? Thanks paul, ------------- 1963 Classic (handed down to my daughter) 67 Riviera 68 barracuda 1971 Ski Nautique Promo 86 Silver Nautique 1995 Ski Nautique |
Posted By: cameo3145
Date Posted: May-12-2006 at 8:40pm
|
Posted By: cameo3145
Date Posted: May-12-2006 at 8:41pm
| Scott I live in Cincinnati |
Posted By: DrCC
Date Posted: May-13-2006 at 10:11am
|
Paul,
Here is a pic of the trailer with the nautique on. http://i54.photobucket.com/albums/g96/DrCC-74/c63a18aa.jpg Thanks A.T. |
Posted By: ScottZ
Date Posted: May-13-2006 at 12:03pm
|
DrCC,
Does your boat that you are parting out have the rope guide (about 18 long) the loops over the rear lifting eye, etc? ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: DrCC
Date Posted: May-13-2006 at 8:33pm
|
ScottZ,
I do not have the ski rope deflector, it did a long time ago. I cannot find it or the shift lever for the dash. However, I did find the original stern light and a pair of extra windsheild corners. Have not had any nibbles on the pylon or windsheild. So, I'm changing that to 150.oo shipped. (continental US) Thanks AT PS: windsheild just sold, the spare corners will go with it. |
Posted By: richardbruni
Date Posted: May-15-2006 at 11:02am
| Do you have a flag or flag pole? |
Posted By: richardbruni
Date Posted: May-15-2006 at 11:06am
| Is the bow light still available? |
Posted By: DrCC
Date Posted: May-15-2006 at 12:54pm
|
Richard,
Bow lt. sold. It's going to Ohio today. I do have an exact tracing of the lettering from this flag. http://i54.photobucket.com/albums/g96/DrCC-74/66burgee.jpg I never did have a flagstaff. If you would like a copy of the lettering, I'd be glad to send you one. Thanks AT |
Posted By: DrCC
Date Posted: May-16-2006 at 8:47pm
|
willieb wrote:
do you still have the mustang/horse bezel on the console? and if so how much do you want for it? Horsey's on his way! email me. Thanks AT |
Posted By: fredo68
Date Posted: May-17-2006 at 2:26pm
|
if anyone wants a correct craft chrome
script 65-70 era theres one on ebay last glance it was right at 80. fredo68 ------------- fredo68 |
Posted By: DrCC
Date Posted: May-17-2006 at 8:24pm
|
Looks like Jr got a pretty good deal on my pair.
Hey Fredo, If your interested in my 302, I might be able to bring it to you. Thanks AT |
Posted By: captinr
Date Posted: May-19-2006 at 10:28am
|
Greetings! Steering wheel arrived yesterday. The Misses is still undecided if she likes it? Go figure. Anyway, without going through the five pages of posts, did you have or still have the "Mustang" script emblem? I've got the horsey
Thanks again |
Posted By: jagnweiner
Date Posted: May-19-2006 at 10:35am
|
DrCC-
My brother might be intested in the windshield if you still have it. What kind of shape is it in? How wide is it? He needs a one piece windshield for a 59 Aqua Skier and this might work. -Scott ------------- Scott Johnson |
Posted By: DrCC
Date Posted: May-19-2006 at 2:34pm
|
Hi captinR, In the future, I predict you will sell your boat to WakeSlayer. Scott, Windshield is 60 5/16" wide 14 3/4" tall. Good condition, has all the mounting hardware. It would need a new rubber piece for the bottom. That piece is still available from Taylor Made Products. Thanks AT |
Posted By: jagnweiner
Date Posted: May-19-2006 at 2:55pm
|
Thanks. I'll check with my brother. Where in MO are you located? ------------- Scott Johnson |
Posted By: DrCC
Date Posted: May-20-2006 at 12:39am
|
Found more parts!!! |
Posted By: Atmspltr
Date Posted: May-20-2006 at 6:56am
|
How much for the rudder (with steering arm if you have it)? -------------  http://i73.photobucket.com/albums/i201/Atmspltr/frontboat.jpg - 67 Mustang Resto-Mod
|
Posted By: ScottZ
Date Posted: May-20-2006 at 9:44am
|
DrCC,
I put the check in the mail yesterday for the fin. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: DrCC
Date Posted: May-20-2006 at 11:55am
| SOLD !!! |
Posted By: Atmspltr
Date Posted: May-20-2006 at 12:38pm
|
What conditon is the rudder in?...particularly the shaft, any wear? ever bent? I would not need the packing log.
Thanks in advance. RB ------------- http://i73.photobucket.com/albums/i201/Atmspltr/frontboat.jpg - 67 Mustang Resto-Mod
|
Posted By: DrCC
Date Posted: May-20-2006 at 7:14pm
| Sold !!! |
Posted By: captinr
Date Posted: May-22-2006 at 12:51am
|
Alan,
Did you ever sell the swim platform? What do you need for the morse control? I ran the '68 over the weekend and spent about 5 hours de-Mcgyverizing it.Supposed the 289 Intercepter. Distributor has been changed to an early electronic automotive style with a "brain box" Vacumn advance was disconected. Has a two barrel holley that I don't think is original because it has the hot air choke thermostat that was also wide open and creating a HUGE vacumn leak at full throttle. Any thoughts on how to correct choke problem? What is the correct sequence to adjust the Morse controls? Mine won't shift into forward without the throttle coming on first. Look forward to hearing from you. Rodney |
Posted By: DrCC
Date Posted: May-22-2006 at 1:58am
| Hi captinR, |
Posted By: captinr
Date Posted: May-22-2006 at 9:24am
|
Morning Doctor,
I guess my question to you or any of the forum members is what type of choke setup was used back then? I looked over the manifolds and cannot find a heat source for the choke coil. I plugged the inlet to seal the vacumn leak and the boat ran perfect all the way up to 4300 RPM. She is just a bit tough to start cold with no choke. Thanks for the info on the controls. I can let you know if I need yours if I cannot get mine to function properly. I am interested in the platform if you have it. P.S. The boat steers great but I didn't get your wheel installed as my bride is still debating how it looks ;-( |
Posted By: DrCC
Date Posted: May-22-2006 at 11:19pm
| Hi capt. |
Posted By: captinr
Date Posted: May-23-2006 at 9:54am
|
Thanks Alan for the note. I will look closer at the exhaust manifold this weekend when we go back to the lake. Let me know ASAP on the platform. Do you have the mounting brackets? Which boat is Tim D's?
thanks again Rodney |
Posted By: captinr
Date Posted: May-23-2006 at 1:07pm
|
Hello Alan,
Sorry I forgot to ask about the stern light. Still available? How much? |
Posted By: DrCC
Date Posted: May-23-2006 at 5:13pm
| Hey Capt. |