Print Page | Close Window

CONTROL ARM WITH LOCKOUT

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=29049
Printed Date: November-18-2024 at 1:35pm


Topic: CONTROL ARM WITH LOCKOUT
Posted By: ricofrancois
Subject: CONTROL ARM WITH LOCKOUT
Date Posted: February-22-2013 at 4:57pm
Hi

I replaced the transmission control cable on my 97SN196. The control arm was catching which caused bad pull up for skier and engine hesitation. Now with a new cable throttle control is smooth and a real pleasure.

My question is there is a silver pin on the control arm that is going through the lockout mechanism. This pin keeps pocking out when the lockout is used when driving. I push it back in by hand or with a screwdriver but it keeps moving out.

Any of you had this issue?



-------------
Ski Nautique 97 - GT40 EFI



Replies:
Posted By: phatsat67
Date Posted: February-22-2013 at 6:02pm
Probably just a worn out roll pin or hole? I've never taken that style apart before. I'm sure someone has because the lock out pieces break.

-------------


Posted By: ricofrancois
Date Posted: February-22-2013 at 6:41pm
Thanks it makes sense. The pin would be easy enough to replace but not sure the part alone exists. Is this arm made by teleflex? If so I will try them.

-------------
Ski Nautique 97 - GT40 EFI


Posted By: phatsat67
Date Posted: February-22-2013 at 6:48pm
All I can order from Nautique is the full assembly.

-------------


Posted By: SNobsessed
Date Posted: February-24-2013 at 3:17am
This came up last week too:

http://www.marinemanifold.com/p-29914-hand-lever-for-mv-2-control.aspx" rel="nofollow - Lever

-------------
“Beer is proof that God loves us and wants us to be happy.”

Ben Franklin


Posted By: 8122pbrainard
Date Posted: February-24-2013 at 7:37am
Originally posted by phatsat67 phatsat67 wrote:

All I can order from Nautique is the full assembly.
Zach,
When N3 orders parts, is the PO addressed to "Nautique" or "Correct Craft"?

-------------
/diaries/details.asp?ID=1622" rel="nofollow -

54 Atom

/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique

64 X55 Dunphy

Keep it original, Pete
<



Print Page | Close Window