87 Martinique part out
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=29293
Printed Date: November-30-2024 at 10:03am
Topic: 87 Martinique part out
Posted By: 79SNbrady
Subject: 87 Martinique part out
Date Posted: March-22-2013 at 6:05pm
|
I've finally decided to part out my 87 Martinique project What I have for sale: Swim platform w/mounting brackets (make offer) - SOLD Windshield with frame (make offer) Gauges $75 Wood trim $100 Engine cover $200 Rear tray $75 Strut $150 Tracking fins make offer Bow railing $75 Rub rail $100 Engine cradle (make offer) Engine mounts (make offer) One muffler $100 Ski pylon $150 Bow vents $25 each Stern vents $25 each Rudder $150 Single axel trailer $750 There is more parts but this is all I remember currently off the top of my head. I do have a prop shaft but If it will fit my 79 SN I'm going to keep it. I will post pictures this weekend. Majority of the prices are obo, and I do except PayPal but 2.6% PayPal charge needs to be added to the price. I bought this boat as a project and decided to part it out to make room for a new boat. The boat did not come with a engine or trans. ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Replies:
Posted By: gR@HaM
Date Posted: March-22-2013 at 6:10pm
|
Hi, do you have a reverse rotation harmonic balancer for a 351w? ------------- '82 Ski Tique |
Posted By: 79SNbrady
Date Posted: March-22-2013 at 7:05pm
|
Sure don't. But I'll see if I can find you one ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Posted By: mark c
Date Posted: March-22-2013 at 7:18pm
|
Is the speedometer a 2025 black Airguide (I'm assuming there is only one), like used in the SN's and BFN's, and do you have them? One of my diaphragms is split, plus I need a few spare parts. |
Posted By: gR@HaM
Date Posted: March-22-2013 at 8:15pm
Please! ------------- '82 Ski Tique |
79SNbrady wrote:Posted By: 79SNbrady
Date Posted: March-22-2013 at 9:36pm
|
I do have the speedo. I will take picture of it tomorrow ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Posted By: Got Tiques
Date Posted: March-22-2013 at 11:59pm
|
Nick, I'd like to buy the gauges. Let me know what you have for $75, and post a photo if you can. Thanks, Todd ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: bluebird88
Date Posted: March-24-2013 at 6:55pm
|
Hi Nick I am looking for extra parts for my 1988 CB Martinique Windshield with frame ? what color is the one you have. I due not think it will fit a 1988 as I think the deck is higher ( maybe other ccfans will know ) Strut ? Is it a ( 6A6 stamped on side ) Rudder and port ? Is it a 1 1/4" shaft and have a plastic trim tab or just solid on the back edge . ( I think the 1987 and 1988 were the same for the rudder and strut ) Please send pictures Thanks CWW ------------- cww |
Posted By: audiodude
Date Posted: March-25-2013 at 4:45pm
|
Hi I may be interested in the Tachometer. Art ------------- 2000 Ski Nautique 1989 Correct Craft 2001 In the words of Milton Berle: "You can lead a man to Congress but you can't make him think" |
Posted By: 79SNbrady
Date Posted: March-25-2013 at 7:47pm
|
I have pictures on my phone but it won't allow me to upload them. I can text them or email them. I will post with photobucket later today once I get back from the gym. 423-three3three-47nine3 ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Posted By: Jtandy
Date Posted: March-26-2013 at 2:54pm
| Do you have interior parts drivers seat passenger. Rear. Email pic jtandy@bellsouth.net or 901 eight 33two five 66 thx |
Posted By: sam57
Date Posted: March-27-2013 at 10:15am
| I'm interested in the trailer, please send pictures to sam5744720@yahoo.com |
Posted By: bluebird88
Date Posted: April-15-2013 at 9:03pm
|
Hi Nick Any updates on the items below 04/15/2013 I am looking for extra parts for my 1988 Closed bow Martinique Windshield with frame - need aluminum color. I due not think it will fit a 1988 as I think the deck is higher and no side windows ( maybe other ccfans will know ) Strut ? Is it a ( 6A6 stamped on side ) Rudder and port ? Is it a 1 1/4" shaft and have a plastic trim tab or just solid on the back edge . ( I think the 1987 and 1988 were the same for the rudder and strut ) Please send pictures to cwwfirerepair@aol.com Thanks CWW  ------------- cww |
Posted By: 87 BAREFOOT
Date Posted: May-29-2013 at 8:05pm
| Any chance you would have a pair of Motor box hinges with the quick release pins on that 1987 martinique? i think they are the same hinges on my 87 barefoot |
Posted By: Hollywood
Date Posted: May-30-2013 at 12:48am
|
Those hinges are still available new. ------------- |
Posted By: martie
Date Posted: May-30-2013 at 1:39am
| Hi, I am interested in your windshield. Does it have the moveable vent windows? You can reach me at 818 262-0416. Thanks, Bruce |
Posted By: Orlando76
Date Posted: May-30-2013 at 6:59pm
| Is there a Morse throttle controller available? |
Posted By: Hooty222
Date Posted: May-30-2013 at 9:01pm
|
Hello I am interested in your swim platform (thinking its the same as a barefoot) any photos? or condition Thanks, Bob Stierhe4@aol.com ------------- 1986 Ski nautique 351 1988 Barefoot nautique 454 |
Posted By: searider
Date Posted: June-01-2013 at 10:27am
Posted By: under prop
Date Posted: June-01-2013 at 11:01pm
|
I'd like to see your trailer pics. Thanks, Very interested, Rob 816.210.8584  ------------- Skiing, sailing, & diving! |
Posted By: 79SNbrady
Date Posted: June-02-2013 at 5:30pm
Do you want pictures text to you at that number? And swim platform sold the other day ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Posted By: 79SNbrady
Date Posted: June-02-2013 at 5:33pm
Yes there is! ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Posted By: under prop
Date Posted: June-02-2013 at 5:52pm
|
Nick, Yes please, thank you. Rob ------------- Skiing, sailing, & diving! |
Posted By: Got Tiques
Date Posted: June-02-2013 at 11:19pm
|
Nick, You've been silent for a while; Hope everything is OK. I'm still interested in the gauges. See my response above. Let me know. Thanks, Todd ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: audiodude
Date Posted: June-05-2013 at 7:16pm
|
Hi I am looking for a set of horns for my 2001. Let me know if you have them. thanks, Art ------------- 2000 Ski Nautique 1989 Correct Craft 2001 In the words of Milton Berle: "You can lead a man to Congress but you can't make him think" |
Posted By: cmacbuck69
Date Posted: June-19-2013 at 11:47pm
| ANy idea if the trailer would work for an 84 ski nautique 2001? Thnaks, |
Posted By: 89Martinique
Date Posted: June-20-2013 at 5:10pm
|
CUP HOLDERS please!! I hate the cheap plastic ones in the 89's. Miss the good old wood ones. If you have them I would love to buy all of them off of ya. Let me know if you have em. Thanks, Joe ------------- Current Boats: 1992 Supra Comp-TS6M PCM 351w HO Pro Boss Pro-Tec Ignition - Full Composite (no wood stingers!) 1989 (3rd Gen) Correct Craft Martinique B/R PCM 351w Power Plus 1984 E-Scow Keuka Lake, |
Posted By: 4woody
Date Posted: July-02-2013 at 3:23am
|
Still have tracking fin you can text or call 214-7666-9533 Thxs Jody |
Posted By: 70mustangky
Date Posted: July-02-2013 at 3:26pm
| I need 1 tracking fin please PM me |
Posted By: ScrewDrive
Date Posted: October-10-2013 at 1:33pm
| I need seat skins for the rear bench and for the bow of my Martinique, are yours available? If so can you take some pictures? I might need a couple of those vents too, I have to check my boat and see which are broken. |
Posted By: 89Martinique
Date Posted: October-10-2013 at 7:25pm
|
good luck, we have been trying to buy the cup holders and ski pylon for months now, very little communication. I think he just gave up... ------------- Current Boats: 1992 Supra Comp-TS6M PCM 351w HO Pro Boss Pro-Tec Ignition - Full Composite (no wood stingers!) 1989 (3rd Gen) Correct Craft Martinique B/R PCM 351w Power Plus 1984 E-Scow Keuka Lake, |
Posted By: gR@HaM
Date Posted: October-10-2013 at 7:35pm
|
Doh! I was about to ask about the pylon ------------- '82 Ski Tique |
Posted By: 79SNbrady
Date Posted: October-11-2013 at 12:25am
I sent you an email a while back on shipping quote for the ski pylon. All interior skins are trashed. The boat wasn't taken very well care of interior wise ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Posted By: 89Martinique
Date Posted: October-11-2013 at 12:33am
|
I don't think your ski tique has the same kind of pylon. But I don't know whats up. He said he had everything out and was going to take pics for us then nothing. He said he was ready to get the pylon boxed up and shipped, and still nothing... ------------- Current Boats: 1992 Supra Comp-TS6M PCM 351w HO Pro Boss Pro-Tec Ignition - Full Composite (no wood stingers!) 1989 (3rd Gen) Correct Craft Martinique B/R PCM 351w Power Plus 1984 E-Scow Keuka Lake, |
Posted By: 79SNbrady
Date Posted: October-11-2013 at 11:58am
|
Sorry for slacking so bad. I can't for the life of me find the cup holders. I sent an email with shipping quotes and never heard back. I just bought a 07 236 so I've been kinda distracted with it. Easy way to get ahold of me is thoroughly text or call at 423/threethreethree/four79three ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Posted By: 89Martinique
Date Posted: October-12-2013 at 2:17am
|
hmmm... Never received an email... Will contact you tomorrow. ------------- Current Boats: 1992 Supra Comp-TS6M PCM 351w HO Pro Boss Pro-Tec Ignition - Full Composite (no wood stingers!) 1989 (3rd Gen) Correct Craft Martinique B/R PCM 351w Power Plus 1984 E-Scow Keuka Lake, |
Posted By: shawn123
Date Posted: January-11-2014 at 9:15pm
|
I see this post is quite old but wondered if you still have tracking fins. Thanks ------------- if it floats it's not sunk |
Posted By: 79SNbrady
Date Posted: January-12-2014 at 11:47pm
|
Tracking fins are already sold sorry ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Posted By: shawn123
Date Posted: January-16-2014 at 9:58am
|
Do you happen to have the lid and hinges that go over rear storage area? ------------- if it floats it's not sunk |
Posted By: mountaineerminer
Date Posted: February-01-2014 at 3:52pm
|
Shawn, If you have not yet heard from Nick you might try texting or calling him, 423-three3three-47nine3 (as posted early in the thread). Just got some motor mounts off him, good guy, great to deal with, parts at my doorstep 2 days after talking to him. Mike |
Posted By: 79SNbrady
Date Posted: February-02-2014 at 2:35am
Glad to hear they made it, tried to send you a text to see if they made it but it would never send. Nick ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Posted By: 79SNbrady
Date Posted: February-02-2014 at 2:37am
The lid I have is in terrible shape if I even still have it. But I think I still have the hinges. Ill look for them and let you know. ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Posted By: shawn123
Date Posted: February-02-2014 at 11:19am
|
looking for the rear storage compartment (rear tray) cover. I have the hinges and will re-upholster just need the frame and foam. ------------- if it floats it's not sunk |
Posted By: crowell1
Date Posted: April-25-2014 at 9:44am
|
Do you still have the strut I am looking for a 6a6 you can call 7166802046 crowell.lonnie@yahoo.com thanks ------------- Lonnie |
Posted By: ccrider21
Date Posted: August-06-2014 at 12:04pm
|
Do you have the shifter/throttle control assembly? ------------- 88 Martinique C/C |
Posted By: missicbc
Date Posted: September-17-2014 at 7:33am
| I can find you one http://www.mmovegas.com/" rel="nofollow - Fut Coins |
Posted By: chack2104
Date Posted: April-22-2015 at 4:33pm
|
Do you have a port side wind shield assembly with the window to close off the bow rider to sell? Cheers!! Chack2104 |
Posted By: 79SNbrady
Date Posted: April-22-2015 at 5:06pm
|
Yes I do, I prefer to sell the whole assembly, but I'm willing to cut you a deal for the whole thing. If you can shoot me a text 423-333-4793 ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Posted By: xarmypilot
Date Posted: April-28-2015 at 11:16pm
|
Do you have the stern light pole available? Hopefully the 87 Martinique & the 87 SN2001's were interchangable... ------------- '87 SN 2001 http://mbbw.com/WIP/DSCN9620.JPG" rel="nofollow - '68 Chris~Craft Grand Prix (Past family boat) '72 Checkmate Mx16 (Past family boat) "Speed is life, altitude is life insurance" |
Posted By: ryans82nautique
Date Posted: May-01-2015 at 2:09pm
|
Pei you have an exhaust manifold off the 351? ------------- 1982 Nautique 2001 1984 Carver 3607 Yacht 1999 SAN (8.2L Python) SOLD |
Posted By: ryans82nautique
Date Posted: May-01-2015 at 2:10pm
|
Do you have an exhaust manifold off the 351? ------------- 1982 Nautique 2001 1984 Carver 3607 Yacht 1999 SAN (8.2L Python) SOLD |
Posted By: 79SNbrady
Date Posted: May-02-2015 at 11:58am
|
Sorry I do not, but I have some contacts, an can get you some new manifolds possibly cheaper than any where else ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Posted By: chack2104
Date Posted: May-04-2015 at 12:39pm
|
What will you take for the windshield? Does it have a black frame? Is it for a open bow? Let me know either way. Also looking for a back seat frame. Talk to you soon. |
Posted By: Smizerov
Date Posted: June-16-2015 at 4:53pm
|
I see this is a little old listing but are there any more parts available? ------------- Smizerov |
Posted By: soldthefarm3
Date Posted: June-28-2015 at 8:34pm
|
Do you have a bell housing for a 351w and im looking for a rudder, ------------- Pete |
Posted By: Old skier
Date Posted: July-15-2015 at 12:40am
| Do you still have the shifter available? |
Posted By: anm2254
Date Posted: August-04-2015 at 10:06am
|
What will it cost to ship the pylon to 19038 or 01776 zip code? I have $75.00 ready to buy it. John |
Posted By: mark c
Date Posted: August-04-2015 at 1:41pm
| You looking for a pylon specific to a Martinique, cause I've got one, minus the ring and finger, for a Ski Nautique just taking up space in my tool house you can have if you want to pick it up. Its from an 83 I think, I'm out by Worcester (01776 is Sudbury MA). I think a Martinique pylon is similar to, if not the same as a Barefoot Nautique and the Dominique, and they are different than the ones a Ski Nautique used. If your looking for a Martinique pylon you can ignore this message. |
Posted By: larsontkmm
Date Posted: September-30-2015 at 10:51am
|
Does it have a Pylon? ------------- |
Posted By: larsontkmm
Date Posted: October-02-2015 at 1:28am
|
Is the pylon available? Todd ------------- |
Posted By: 79SNbrady
Date Posted: October-02-2015 at 3:31pm
Yes it is, if you can contact me by phone an I will dig it out this weekend ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Posted By: larsontkmm
Date Posted: October-03-2015 at 12:40am
|
What's your number? Todd 704-309-7426 ------------- |
Posted By: 79SNbrady
Date Posted: October-03-2015 at 11:39am
423-333-4793 ------------- "It's just water... not concrete or dirt... so just throw it" -Parks Bonifay 1979 Ski Nautique - (stringer job completed summer 2012) 2007 236 Team - All White! |
Posted By: larsontkmm
Date Posted: October-05-2015 at 3:38pm
The original lenght to the SW20 was a 52" ring and finger with bildge mounting bracket that had room for a pin, is this simular to the martinique? ------------- |
Posted By: psherwin
Date Posted: November-23-2015 at 3:19am
|
By some chance, do you have the convertible top left? It was the snap to the windshield type. for the Martiniques. Just the frame would be good. mailto:rrftu4.6@gmail.com" rel="nofollow - rrftu4.6@gmail.com ------------- '86 Martinique,351 PCM |
Posted By: Jose Rodriguez
Date Posted: December-04-2015 at 12:34pm
|
HI, DO YOU STILL HAVE THE BOW & RUB RAILS.? THANKS AND HAVE A GOOD ONE. |
Posted By: jblunceford
Date Posted: April-06-2016 at 5:55pm
|
Hello, I found your old post for your 87" Martinique part 0ut...I also have an "87 open bow/BR Martinique....I could use a front vent/black plastic vent cover. I need 1...didn't notice if they are universal/same for each side...if not, I need the passenger side front vent. Also, do you still have the brass stabilizer tube that's mounted at the transom wall, and the VDO speedo? Thanks in advance... Jeff Lunceford Birmingham/Hoover, AL ------------- Jeff in Hoover (Birmingham), AL 1986 CC Martinique Bow Rider 351PCM |
Posted By: velde99
Date Posted: April-06-2016 at 6:39pm
| Steering wheel? |
Posted By: Mike Parmley
Date Posted: July-16-2016 at 3:30am
| Still have the trailer? |
Posted By: mrstudor
Date Posted: July-24-2016 at 11:05am
|
Hi, I am very interested in your windshield and frames. Are they still available and where are you located. Please feel free to call directly 781-484-8627 Duke. Many thanks, ------------- Nannie |
Posted By: mrstudor
Date Posted: July-24-2016 at 11:06am
|
Hi, I'm interested in your windshield and frames. Are they still available, and where are you located? Can you post photos? Please feel free to call me at 781-484-8627 Duke ------------- Nannie |