Print Page | Close Window

Pinstripe & decal removal

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=29639
Printed Date: November-18-2024 at 9:51am


Topic: Pinstripe & decal removal
Posted By: velde99
Subject: Pinstripe & decal removal
Date Posted: April-25-2013 at 1:32pm
Anyone know of effective way to remove old pinstriping from a 1991? It is old and brital- I am removing it, but is breaks off every inch or so and is leaving the old dried out "stickum" on the hull. Want to get it off as quickly as possible without damaging the hull.



Replies:
Posted By: cphase
Date Posted: April-25-2013 at 1:55pm
Have you tried a http://www.amazon.com/3M-7498-STRIPE-WHEEL-W-ARBOR/dp/B00063VT0G" rel="nofollow - 3M eraser wheel ?



-------------
Thanks,

Jeff
http://www.correctcraftfan.com/diaries/details.asp?ID=6549" rel="nofollow - 82 SN
http://www.archlinux.org" rel="nofollow - Arch Linux


Posted By: Oceanfisher1010
Date Posted: April-25-2013 at 1:59pm
I just removed the decals and pin striping on my 1989. A heat gun is a must. Removes quickly and easily. Also, leaves very little adhesive. You can try a hair dryer on its highest setting. It may take more time to heat the pin striping with a hair dryer.

I bought my heat gun for $30 at Ace Hardware.


Posted By: tbeard
Date Posted: April-25-2013 at 2:34pm
I bought a Harbor Freight heat gun for $15.00. It works but the pin strip still takes some time due to breakage. You have to get the decal the right temp...soft enough to pull off but not so hot that it almost melts.
Clean glue off with acetone.

-------------
Thanks.......Tom


Posted By: Kiteboarder
Date Posted: April-26-2013 at 12:30am
3m stripe off wheel works great, used mine today. I ordered it off Amazon after one of my neighbors that works for a body shop told me about it. http://www.amazon.com/3M-7498-STRIPE-WHEEL-W-ARBOR/dp/B00063VT0G/ref=sr_1_1?ie=UTF8&qid=1366939757&sr=8-1&keywords=3m+stripe+off+wheel


Posted By: Kiteboarder
Date Posted: April-26-2013 at 12:35am
Did transom in about 10 mins!


Posted By: 8122pbrainard
Date Posted: April-26-2013 at 7:58am
Originally posted by Kiteboarder Kiteboarder wrote:

3m stripe off wheel works great, used mine today. I ordered it off Amazon after one of my neighbors that works for a body shop told me about it. http://www.amazon.com/3M-7498-STRIPE-WHEEL-W-ARBOR/dp/B00063VT0G/ref=sr_1_1?ie=UTF8&qid=1366939757&sr=8-1&keywords=3m+stripe+off+wheel

http://www.amazon.com/3M-7498-STRIPE-WHEEL-W-ARBOR/dp/B00063VT0G/ref=sr_1_1?ie=UTF8&qid=1366939757&sr=8-1&keywords=3m+stripe+off+wheel" rel="nofollow - For the convenience of all, here's a proper link

-------------
/diaries/details.asp?ID=1622" rel="nofollow -

54 Atom

/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique

64 X55 Dunphy

Keep it original, Pete
<



Print Page | Close Window