hale propeller repair
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=29648
Printed Date: November-18-2024 at 3:32am
Topic: hale propeller repair
Posted By: audiodude
Subject: hale propeller repair
Date Posted: April-26-2013 at 8:40pm
|
Hi does anyone in CT have any experience with Hale Propeller in Old Saybrook. Michigan Wheel recommended them for prop repair. Thanks, Art ------------- 2000 Ski Nautique 1989 Correct Craft 2001 In the words of Milton Berle: "You can lead a man to Congress but you can't make him think" |
Replies:
Posted By: Hollywood
Date Posted: April-26-2013 at 8:43pm
|
Why are you still turning a Michigan Wheel? Lolz ------------- |
Posted By: audiodude
Date Posted: April-26-2013 at 8:51pm
|
I put the acme 422 on, I just want the Michigan for a spare. Lots of rocks on Lake Pocotapaug! I know where most of them are but one never knows! ------------- 2000 Ski Nautique 1989 Correct Craft 2001 In the words of Milton Berle: "You can lead a man to Congress but you can't make him think" |
Posted By: jimsport93
Date Posted: April-27-2013 at 12:54pm
|
Art, I have used one of our site sponsors, Delta Propellers, for a couple of repairs. One was an original Michigan wheel and the other an Acme 422. Both were properly repaired and with a fast turn around time. Like to support those who support us. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=2798 - 93 Sport Nautique |
Posted By: audiodude
Date Posted: April-27-2013 at 1:15pm
|
Thanks Jim, I sent Delta an email. Hale propeller was pretty expensive so I won't be going that route. I was just hoping to drop it off locally but I will send it to Delta. I agree with supporting people who support us. ------------- 2000 Ski Nautique 1989 Correct Craft 2001 In the words of Milton Berle: "You can lead a man to Congress but you can't make him think" |
Posted By: 8122pbrainard
Date Posted: April-27-2013 at 1:15pm
+1 ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
jimsport93 wrote:Posted By: dwouncmd
Date Posted: April-28-2013 at 8:53am
|
Delta has re worked two for me, the original OJ and and Acme. Good work, fast turn around and reasonable price. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=6535&sort=&pagenum=2" rel="nofollow - 89 SN <a href="http://www.correctcraftfan.com/diaries/details.asp?ID=6567&sort=&pagenum=1" rel="nofollow">7 |
Posted By: dwouncmd
Date Posted: April-28-2013 at 8:53am
|
Delta has re worked two for me, the original OJ and an Acme. Good work, fast turn around and reasonable price. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=6535&sort=&pagenum=2" rel="nofollow - 89 SN <a href="http://www.correctcraftfan.com/diaries/details.asp?ID=6567&sort=&pagenum=1" rel="nofollow">7 |
Posted By: jtryon
Date Posted: April-30-2013 at 11:26am
| I used Hale to re-pitch a prop down to an 11-pitch last Spring and they do great work. $175 to re-pitch and it came out like new with a build sheet, warranty, etc. I can't remember where I got their name from, but whatever site it was said they were the only nationally certified prop builder in CT which is why I went there. I'd go there again. |
Posted By: aaidan602
Date Posted: July-19-2013 at 4:18am
|
Check the blades on your propeller for nicks or bent parts. These are all signs of propeller wear that typically signal time for a propeller replacement. ______________ http://www.deltaprop.com/" rel="nofollow - boat props |