Sport Nautique Integrated Ballast
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=29724
Printed Date: November-24-2024 at 11:26pm
Topic: Sport Nautique Integrated Ballast
Posted By: Kmac1587
Subject: Sport Nautique Integrated Ballast
Date Posted: May-03-2013 at 2:13am
Hey Everyone,
I'm looking for some pictures/ideas on what some people have done to integrate ballast/ballast pumps into their SN Direct Drives. We are using primarily 2 Bags on the sides of the engine (possibly replacing the led in bow with a other bag) and i'm looking for some ideas on how to clean up the setup. If people have worked out a way to run hoses so they aren't hauling out pumps and hoses every-time they want to fill up thats what I am mainly looking for.
Thanks
|
Replies:
Posted By: kylem428
Date Posted: May-03-2013 at 4:08pm
I will be working on my '94 sport this weekend and will take some photos. I am installing a 4-bag, 4 reversible pump automated system with 3 of the 4 pumps hidden under the rear gunnels by the rear seat. One of the pumps will be in the ski locker.
I have a bag on each side of the engine, one in front of the rear seat, and one in the ski-locker for a total capacity of about 1600#. 2- 3/4" thru hulls will feed the pumps. I have yet to put those in but hope to get on it if the weather holds for me this weekend.
Stay tuned...
Kyle
|
Posted By: Kmac1587
Date Posted: May-03-2013 at 9:55pm
|
Thats awesome much appreciated Kyle. Good luck with the install
|
|