Transmission, manifolds, etc
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=29813
Printed Date: November-30-2024 at 5:51pm
Topic: Transmission, manifolds, etc
Posted By: sportsmed
Subject: Transmission, manifolds, etc
Date Posted: May-12-2013 at 12:39am
|
I'm trying to finish my 70 Mustang project and have a need to sell some extra parts to fund the last leg of the restoration. I have a transmission, starter plate, bell housing, fly wheel, starter, motorola alternator and a few other odds and ends. Make an offer on any or all of it! See photos. These came from a 73 Mustang that was in the middle of a being restored when the guy doing it skipped town. The former owner lost interest and sold me the engine and transmission. I had other parts from another engine that I wanted to use so these that you see here are extra and taking up space in my shop. Check out photos on photobucket: http://s1302.photobucket.com/user/Ronn_Hollis/media/IMG_1589_zpsc74fa8ff.jpg.html?sort=3&o=0 http://s1302.photobucket.com/user/Ronn_Hollis/media/IMG_1588_zps6f322b60.jpg.html?sort=3&o=1 http://s1302.photobucket.com/user/Ronn_Hollis/media/IMG_1587_zps02417b51.jpg.html?sort=3&o=2 http://s1302.photobucket.com/user/Ronn_Hollis/media/IMG_1586_zps69139500.jpg.html?sort=3&o=3 No I've never used these parts so can't vouch for them as working. I did mount the pressure plate, bell housing, and fly wheel but decided to go with a HM setup instead. I also have a sherwood water pump (not shown) but I know it needs to be rebuilt. Thanks! Sportsmed ------------- 1970 Correct Craft Mustang |
Replies:
Posted By: 8122pbrainard
Date Posted: May-12-2013 at 7:38am
Ronn, For the convenience of all, here's proper links: http://s1302.photobucket.com/user/Ronn_Hollis/media/IMG_1589_zpsc74fa8ff.jpg.html?sort=3&o=0" rel="nofollow - Link 1 http://s1302.photobucket.com/user/Ronn_Hollis/media/IMG_1588_zps6f322b60.jpg.html?sort=3&o=1" rel="nofollow - Link 2 http://s1302.photobucket.com/user/Ronn_Hollis/media/IMG_1587_zps02417b51.jpg.html?sort=3&o=2" rel="nofollow - Link 3 http://s1302.photobucket.com/user/Ronn_Hollis/media/IMG_1586_zps69139500.jpg.html?sort=3&o=3" rel="nofollow - Link 4 I believe what you referred to as a "pressure plate" is actually the dampner. New ones are always recommended so even if it fits you other project, don't be tempted to use it. A new high quality Sachs dampner is under $100. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
sportsmed wrote:Posted By: sportsmed
Date Posted: May-12-2013 at 10:16am
|
Thank you for the links and clarification. Best, Sportsmed ------------- 1970 Correct Craft Mustang |
Posted By: sportsmed
Date Posted: May-17-2013 at 4:21pm
|
Anyone need any of these parts for a project? I've got make shop room and will likely sell them for scrap soon unless someone on here needs them. Thanks! Sportsmed ------------- 1970 Correct Craft Mustang |
Posted By: Got Tiques
Date Posted: May-17-2013 at 11:47pm
|
Ronn, The pictures are a little hard to see, but I'm interested in the manifolds, alternator, water pump, transmission, and starter. Send me a PM with better photos and a description of conditions and we should be able to work out a good deal for each of us. Thanks, Todd ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: sportsmed
Date Posted: May-17-2013 at 11:51pm
|
I'll take some more photos tomorrow and send your way. I'm happy to answer your questions the best i an but realize that I have not used these parts personally. i took them off another engine from a '73 CC mustang as I only needed the block. They've been stored indoors since I got them last summer but as to any ability to bolt them on and go, I can't vouch for them at all. Just trying to be fully transparent about them! Sportsmed ------------- 1970 Correct Craft Mustang |
Posted By: Got Tiques
Date Posted: May-18-2013 at 12:12am
|
Ronn, Thanks for the update. I look forward to the photos, and will make an offer. I, as you, hope they are in useable shape!! Todd ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: abolton
Date Posted: May-20-2013 at 11:39am
|
I have the Orig. Intake Manifold and 4150 Carb. avail from my 1978 SN 351 Commander engine Best offer $ shipping point Buffalo NY ------------- ABE |
Posted By: sportsmed
Date Posted: May-20-2013 at 12:40pm
|
Trying this again to add links to new photos of parts as requested. Hope this works! Best, Sportsmed http://s1302.photobucket.com/user/Ronn_Hollis/media/CC%20MUSTANG%20AVAILABLE%20PARTS/IMG_1690_zps99fe2bcf.jpg.html" rel="nofollow - manifold1 http://s1302.photobucket.com/user/Ronn_Hollis/media/CC%20MUSTANG%20AVAILABLE%20PARTS/IMG_1689_zps61b0860d.jpg.html" rel="nofollow - manifolds2 http://s1302.photobucket.com/user/Ronn_Hollis/media/CC%20MUSTANG%20AVAILABLE%20PARTS/IMG_1688_zpsbb800c71.jpg.html" rel="nofollow - manifold3 http://s1302.photobucket.com/user/Ronn_Hollis/media/CC%20MUSTANG%20AVAILABLE%20PARTS/IMG_1686_zps10ee6cb4.jpg.html" rel="nofollow - transmission1 http://s1302.photobucket.com/user/Ronn_Hollis/media/CC%20MUSTANG%20AVAILABLE%20PARTS/IMG_1687_zps4c0a765d.jpg.html?sort=3&o=4" rel="nofollow - trans2 http://s1302.photobucket.com/user/Ronn_Hollis/media/CC%20MUSTANG%20AVAILABLE%20PARTS/IMG_1692_zpsfc705f1c.jpg.html?sort=3&o=0" rel="nofollow - Alernator plate ------------- 1970 Correct Craft Mustang |
Posted By: sportsmed
Date Posted: May-25-2013 at 11:18pm
|
Parts still for sale. Please let me know if these could benefit your boat. Sportsmed ------------- 1970 Correct Craft Mustang |
Posted By: sportsmed
Date Posted: June-02-2013 at 9:17pm
|
Make ANY offer. Parts still for sale. Please let me know if these could benefit your boat. Sportsmed ------------- 1970 Correct Craft Mustang |
Posted By: Got Tiques
Date Posted: June-02-2013 at 11:13pm
|
Ronn, I've been watching these parts for a while now, and I'd like to buy the tranny, pair of manifolds and risers, alternator, starter, and pump for $350 shipped to zip 12302. I can't tell from the photos what they will fit and the condition is not known or even even mentioned, much less guaranteed. Let me know if you are interested and we can share info. Thanks, Todd ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: sportsmed
Date Posted: June-03-2013 at 4:09am
|
Happy to talk to you about your offer and shipping your way. Please contact me directly and we'll work out the details. Best, Ronn ------------- 1970 Correct Craft Mustang |
Posted By: Got Tiques
Date Posted: June-03-2013 at 7:59am
|
Ronn, I'm off to work, but will PM or call tonight. Thanks, Todd ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: delovett
Date Posted: July-29-2013 at 6:00pm
|
Manifolds still around? ------------- 1973 Nautique 351 |
Posted By: abolton
Date Posted: July-29-2013 at 6:25pm
|
yes orig intake manifold & orig. carb, ------------- ABE |
Posted By: sportsmed
Date Posted: July-29-2013 at 6:31pm
|
Yes. I still have the manifolds available. I actually had to put the transmission in action but everything else is available. As for "abolton", please feel free to start your own thread. Hijacking mine is certainly in bad taste and against the spirit of why this forum exists. Sportsmen ------------- 1970 Correct Craft Mustang |
Posted By: bhectus
Date Posted: July-29-2013 at 6:32pm
|
Abe, it would behoove you to start your own for sale thread and not try to jump in and pirate someone else's. That is poor form. **edit: sportsmed beat me to it. ------------- '02 Ski Nautique 196 w/ 5.7 Apex bowtie - Sold '87 Barefoot - sold '97 Super Sport Nautique - originally custom built for Walt Meloon '97 Ski Nautique '83 SN 2001 |
Posted By: sportsmed
Date Posted: July-29-2013 at 6:38pm
|
THanks bhectus. I apreciate the backup! Sportsmed ------------- 1970 Correct Craft Mustang |
Posted By: delovett
Date Posted: July-29-2013 at 6:41pm
|
Any idea what those suckers weight? Would like to do some quick research on shipping cost. ------------- 1973 Nautique 351 |
Posted By: sportsmed
Date Posted: July-29-2013 at 6:44pm
|
I dont' off the top of my head and am away from home on business so no access to give you that info immediately. I am happy to weigh them for you when I return on Wed. Morning if OK. Best, Sportsmed ------------- 1970 Correct Craft Mustang |
Posted By: delovett
Date Posted: July-30-2013 at 1:09pm
|
Sounds good. Thanks! ------------- 1973 Nautique 351 |
Posted By: sportsmed
Date Posted: August-03-2013 at 11:31am
|
Sorry for the delay...just weighed the manifolds and they are about 47 pounds each. Thanks, Sportsmed ------------- 1970 Correct Craft Mustang |
Posted By: delovett
Date Posted: August-07-2013 at 5:46pm
|
Looks like this will be cost prohibitive on the shipping. Too bad ------------- 1973 Nautique 351 |
Posted By: sportsmed
Date Posted: August-07-2013 at 5:48pm
|
no worries! Good luck in your search. Best, Sportsmed ------------- 1970 Correct Craft Mustang |
Posted By: mustangdude
Date Posted: May-05-2015 at 3:37pm
| looking for 1972 mustang 302 exhaust manifolds...810-513-2214....Thanks |
Posted By: 8122pbrainard
Date Posted: May-05-2015 at 8:22pm
------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |