hump removal
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=3035
Printed Date: January-16-2025 at 4:48am
Topic: hump removal
Posted By: hillbilly
Subject: hump removal
Date Posted: February-14-2006 at 2:24pm
|
Iam in the process of redoing the floor and possibly stringers in my 1986 2001. Can I remove the "hump" under the driver side bow? Or does it have some sort of structural functin? Thanks guy's.......
|
Replies:
Posted By: Darrel
Date Posted: February-21-2006 at 1:22pm
Posted By: David F
Date Posted: February-22-2006 at 8:15am
I am not sure, but here is my $0.02 worth since I intimately know the construction of my '93. I believe the "hump" in front of the drivers feet serves two purposes:
1. Allows space for the steering cable, vent hose(s) and electrical wiring to transition into the bilge area.
2. Allows a place to mount the kickboard.
Structurally, I do not believe it is needed as there is not one on the other side.
|
Posted By: Munday
Date Posted: February-22-2006 at 4:19pm
Only 1 thing to add,When i pulled transducer i pulled 2 extra wires.I ended up using them on my hot water shower at a later date.one power one ground.
Love this site need to post a little more instead of lurking
Munday 92SN and various old inboards
|
|