1996 Super Sport latch wiring
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=30505
Printed Date: November-18-2024 at 3:27am
Topic: 1996 Super Sport latch wiring
Posted By: rogier
Subject: 1996 Super Sport latch wiring
Date Posted: June-30-2013 at 8:28pm
|
Maybe it's out there somewhere on the site, but I gave up after 60 mins of searching. Anybody have the color coding for the 1996 super sport nautique hatch? I've got everything rewired and this is the one that is not going perfect yet.
|
Replies:
Posted By: flipflop
Date Posted: July-01-2013 at 10:23pm
Are you trying to rewire the hydraulic engine hatch? (ie. the toggle switch near the throttle?) If so, it's just a set of two bosch style relays run between the battery and ground with the toggle switch controlling the relay.
http://www.planetnautique.com/vb3/showthread.php?7998-Wiring-a-rear-hatch-lift" rel="nofollow - Maybe something like this?
|
Posted By: rogier
Date Posted: July-08-2013 at 11:41am
Thanks, these posts answer mainly the wiring question at the back where the actuator is. This is not so hard, got that fixed already. If I connect a + and - to the switch it will work like a charm.
What I'm looking for is where the original wires come from the dash wiring (color coding) to the switch. This is where I want to connect it to, since it is the last piece of electronics that is not back as it is supposed to be.
Anyone?
|
Posted By: rogier
Date Posted: July-22-2013 at 2:38pm
|
Ok I'm going to troubleshoot wire by wire in the dash.. Hope I find it!
|
Posted By: flipflop
Date Posted: July-22-2013 at 3:44pm
|
Take a few pictures while you're in there for reference. I believe there is a ground coming from dash and 12v+ linked somewhere after the ignition breaker.
|
|