Print Page | Close Window

hdr600 Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=3068 Printed Date: January-16-2025 at 6:03am Topic: hdr600 Posted By: floppy Subject: hdr600 Date Posted: February-20-2006 at 4:51pm any hints on how to run your transducer cable through to bilge area. thanks Replies: Posted By: 79nautique Date Posted: February-20-2006 at 6:12pm follow all the other wires from behind the instrument pannel ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique Posted By: jbear Date Posted: February-20-2006 at 8:24pm 79: Where are posting from? Up home or St. Pete? Sorry we couldn't hook up. john ------------- "Loud pipes save lives" AdamT sez "I'm Canadian and a beaver lover myself"... Posted By: AWhite70 Date Posted: February-21-2006 at 9:28am Like '79 said... The procedure is a little different depending on the model of boat you have but is generally the same. I've installed depth finders on both my '79 and my '02. I look for where the wires go from the engine compartment up through to the dash. On the '79 there is a tube they pass through, I can't remember if there is a tube on the '02 or not. Anyway, I started in the engine compartment with a length of household 14/2 electrical wire (romex). I used this because I had it readily available. Anything that is somewhat stiff but still flexible will work (you can't push a rope). Start feeding the wire through from the engine compartment to behind the dash. Once it comes out the other side tape the transducer wire to it and pull it through. ------------- AWhite70 http://www.correctcraftfan.com/diaries/details.asp?ID=562&sort=revyear&pagenum=5&yrstart=1976&yrend=1980" rel="nofollow - '79 Ski Nautique Posted By: floppy Date Posted: February-22-2006 at 4:53pm thanks worked like a charm.

Print Page | Close Window