Ignition points mounting plate & dist cam
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=30767
Printed Date: November-17-2024 at 3:33pm
Topic: Ignition points mounting plate & dist cam
Posted By: Seals
Subject: Ignition points mounting plate & dist cam
Date Posted: July-15-2013 at 3:00pm
|
1979 sn commander, 351C engine Trying to convert ei ignition back to the original points based system Need mounting plate for points, points, condenser, and distributor cam |
Replies:
Posted By: TRBenj
Date Posted: July-15-2013 at 3:02pm
Unless you have a very rare/oddball engine, I would imagine you mean 351w. It would help if you told us what type of distributor you have, as things differed between marinizers and quite possibly swapped out by previous owners, etc. Im guessing a clip down Prestolite, but a picture would confirm. |
Seals wrote:Posted By: Seals
Date Posted: July-16-2013 at 11:41am
|
Trbenj- it is a clip down presto lite. I have picks but can't seem to paste them into this post. Tag # D3JL- 12100 B. 8L. IBM 7008AS11L. Thanks for your help. I'll send a pic later |