pre cutting
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Off Topic
Forum Discription: Anything non-Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=30842
Printed Date: January-15-2025 at 4:19am
Topic: pre cutting
Posted By: 8122pbrainard
Subject: pre cutting
Date Posted: July-20-2013 at 1:25pm
I've mentioned it before but when ever I need to work on a car or truck, I always say I need to pre cut myself since it's inevitable I'll end up with a cut on a hand. This morning I had to dig into the dash to change the fan speed switch on my Suburban. Damn, under the dash and under door panels are always a PITA due to the tight spaces!! Also, I guess the auto makers don't want their electrical connectors coming apart since you need to be a combination of a magician, an engineer and 4 small screwdrivers to get them apart!! Well, I got it changed out along with plenty of swear words!! At least I only had to go one layer on the dash unlike going all the way to get to the AC evaporator coil!
------------- /diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete <
|
Replies:
Posted By: Toeboat
Date Posted: July-20-2013 at 6:30pm
It's not a project until I am bleeding.
------------- Toeboat
89 BFN w/454 bought new and still love it. 06 Ski Nautique w/ZR6 72 Promo
|
Posted By: phatsat67
Date Posted: July-26-2013 at 7:17pm
My knuckles tell the tale of many late nights in the garage too Pete haha.
-------------
|
Posted By: SNobsessed
Date Posted: July-26-2013 at 7:58pm
Once I got the tang of a timmerman nut poked thru my thumbnail, from trying to release the hood (bad cable). I was in a convenience store parking lot in rural Iowa, BTW. There was only one way out - pull hard with jaw clenched. Never forget that one!
------------- “Beer is proof that God loves us and wants us to be happy.”
Ben Franklin
|
Posted By: phatsat67
Date Posted: July-26-2013 at 8:33pm
OUCH!
Stapled through my finger once and you could see it in the nail.
One other notable one was taking a drain plug out of the sump of my 73 911 when I was about 16. The plug was unmoved for at least 15 years. When it broke loose my pointer finger was at the top of the open end of a 3/4 wrench. Completely ripped the entire pad of my finger off. Folded it over and bandaided it with no stitches. Don't know how I have no scar there.
That car created some interesting stories during my ownership.
-------------
|
Posted By: peter1234
Date Posted: July-26-2013 at 9:11pm
in the hvac business one of the first things everyone does is grab a strip of sheetmetal as a duct hanger in one hand hold it against the duct speed screw it and it turns into a high speed cutting propeller
------------- former skylark owner now a formula but I cant let this place go
|
Posted By: phatsat67
Date Posted: July-26-2013 at 9:15pm
Good lord that sounds deadly.
-------------
|
Posted By: Bones71
Date Posted: July-26-2013 at 9:26pm
Pete, local 91 here. I once drilled through my fingernail on purpose to drain the blood out from a bad pinch. The drill bit caught my nail and pulled in further than I wanted it to. It was was very painful and releving all at once. I was like" owwwww!!! Aahhhhhhh. Never forget that too. My fingernail is still screwed up. 12 years later. Bones.
------------- That money talks, I'll not deny, I heard it once: It said 'Goodbye'
|
Posted By: peter1234
Date Posted: July-27-2013 at 9:38am
I still have a special fingernail also. works better than a coin for scratch tickets
------------- former skylark owner now a formula but I cant let this place go
|
Posted By: phatsat67
Date Posted: July-27-2013 at 10:59am
One of my nails is just getting back to normal.
Usually for blood under the nail I take a lighter and heat up a needle tip. It melts right through and you won't drill further in!! OUCH!
-------------
|
Posted By: audiodude
Date Posted: July-27-2013 at 11:14am
I was playing racket ball on a glass walled court, I went back for as shot feeling for the wall, my pinky got caught in the crack of the door, out if the corner of my eye I saw something fly through the air, looked at my pinky and realized it was my finger nail that went flying! 7 stitches in the finger nail bed!
------------- 2000 Ski Nautique 1989 Correct Craft 2001
In the words of Milton Berle: "You can lead a man to Congress but you can't make him think"
|
Posted By: Bones71
Date Posted: July-27-2013 at 11:20am
Holy Chit. Wow. Got pics?
------------- That money talks, I'll not deny, I heard it once: It said 'Goodbye'
|
Posted By: audiodude
Date Posted: July-27-2013 at 11:24am
No Pics it happened years ago but still in the memory banks
------------- 2000 Ski Nautique 1989 Correct Craft 2001
In the words of Milton Berle: "You can lead a man to Congress but you can't make him think"
|
Posted By: phatsat67
Date Posted: July-27-2013 at 11:35am
even more ouch!
-------------
|
Posted By: Bones71
Date Posted: July-27-2013 at 11:35am
Funny how you never forget that stuff. My wife tells me stuff all the time and I can't remember half of it.
------------- That money talks, I'll not deny, I heard it once: It said 'Goodbye'
|
Posted By: SNobsessed
Date Posted: July-27-2013 at 11:41am
Tony - Your leading the pack at 50%!
------------- “Beer is proof that God loves us and wants us to be happy.”
Ben Franklin
|
Posted By: Bones71
Date Posted: July-27-2013 at 11:45am
You know what my Wife said last night? ..... I don't know, I wasn't listening. Thanks Chris. I try. Hey by the way I want to race again. I think my prop was full of weeds! Also wanted to talk more with you. The Reunion was fun but too short!
------------- That money talks, I'll not deny, I heard it once: It said 'Goodbye'
|
Posted By: SNobsessed
Date Posted: July-27-2013 at 11:49am
Yea, spaced out & never got over to your boat to talk with you at Nbay.
I was wondering if my custom advance curve also gave me the edge out of the hole. Being alone in the boat didn't hurt either!
You're on for the next meet!
------------- “Beer is proof that God loves us and wants us to be happy.”
Ben Franklin
|
Posted By: Bones71
Date Posted: July-27-2013 at 11:52am
Sounds good.
------------- That money talks, I'll not deny, I heard it once: It said 'Goodbye'
|
|