Print Page | Close Window

Anyone running down angled gear? Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: Common Questions Forum Discription: Visit here first for common questions regarding your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=30903 Printed Date: November-24-2024 at 7:24pm Topic: Anyone running down angled gear? Posted By: DayTony Subject: Anyone running down angled gear? Date Posted: July-25-2013 at 7:27am So I'm in the planning stages of my re-power for this fall/winter. I've taken delivery of a brand new 454 crusader and I'm deciding what to do with the gear. This engine has the 8degree down angled gear on it, which I'm not dead set on using, but standard logic leans towards using this gear. With the ridiculous angle these motors are at from the factory I feel any way to level them off will help greatly. Anyone running one of these gears or had any issues trying to in the past? Replies: Posted By: Nautiquehunter Date Posted: July-25-2013 at 9:37am I have a 1.23 to 1 trans in my 89 w351 the engine sits perfectly level . The trans makes up the prop angle.

Print Page | Close Window