Transducer wire pulled out :/
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=31400
Printed Date: November-18-2024 at 1:26am
Topic: Transducer wire pulled out :/
Posted By: shagit
Subject: Transducer wire pulled out :/
Date Posted: September-01-2013 at 2:25am
The transducer wire has been pulled out of the puck, on this teleflex transducer that I have. Anyone know if they can me re- 'stuck' in and still work?
Thanks!
|
Replies:
Posted By: backfoot100
Date Posted: September-01-2013 at 8:39am
My guess is that you're SOL. Every one I've seen is hardwired into the puck and then sealed. You'll have to get a new puck and replace it. I know that they sell them separately.
-------------
When people run down to the lake to see what's making that noise, you've succeeded.
Eddie
|
Posted By: rapok4
Date Posted: September-01-2013 at 9:17pm
|
I have had this happen to me on a different boat and the puck had to be replaced. The hardest part was trying to re-run the wiring with a plug. I tied a string on the broken plug and pulled it out the "hard" way to see if I had to cut wire ties or move anything else in the way. I have been told the composite can be removed, wires soldered, then epoxied, but the manufacturer was against it. I replaced mine.
|
Posted By: shagit
Date Posted: September-02-2013 at 12:20am
Thanks for the replies.... That's what I figured... :/
Now to find one of the pucks.... Puck'n a
|
|