Black Rope for Rub Rail
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=31602
Printed Date: December-02-2024 at 8:00am
Topic: Black Rope for Rub Rail
Posted By: Steve_SN2001
Subject: Black Rope for Rub Rail
Date Posted: September-21-2013 at 10:00am
| Just curious if anyone's done this and who you went with for rope. I have some gelcoay damage I'm repairing under the rub rail so I figure nows a good time to update the looks a little bit. |
Replies:
Posted By: Hollywood
Date Posted: September-21-2013 at 4:40pm
|
I have black rope in my rub rail. Diary #35 ------------- |
Posted By: gun-driver
Date Posted: September-21-2013 at 10:09pm
|
You have to find out what size yours is 1/2" or 5/8" http://www.mcmaster.com/#standard-fibrous-cords/=oly15p" rel="nofollow - http://www.mcmaster.com/#standard-fibrous-cords/=oly15p |
Posted By: gR@HaM
Date Posted: September-22-2013 at 6:36pm
|
Rope or rubber profile? I got the rubber imported from planet Nautique ------------- '82 Ski Tique |
Posted By: gun-driver
Date Posted: September-28-2013 at 12:18pm
Rubber profile |
gR@HaM wrote:Posted By: gR@HaM
Date Posted: September-29-2013 at 6:28pm
Erm.. havent a clue what I was on about regarding Planet Nautique thats a forum int it!! Must have been drinking something pretty strong at the time of posting that   I seem to recall actually buying from go2marine in the US, 1/2" rubber insert and new rub rail ------------- '82 Ski Tique |
Posted By: gun-driver
Date Posted: October-01-2013 at 11:08am
|
Graham The 1/2" seems to be the norm for replacement. I bought rub rail from midwest when they were still open and it came for a 1/2" rope. The left is original 5/8 right is the 1/2" http://s256.photobucket.com/user/gun-driver/media/DSC01143.jpg.html" rel="nofollow">  Bottom is 5/8 top is the 1/2" http://s256.photobucket.com/user/gun-driver/media/DSC01146.jpg.html" rel="nofollow"> 
|
Posted By: TRBenj
Date Posted: October-01-2013 at 11:32am
Careful! 1/2" is in fact the replacement for the smaller rub rails CC used. Those are common on the smaller boats and 86 and earlier 2001's (I think). The larger rub rails used on the later 2001's and larger boats (like our '79 BFN) use 5/8". So there really isnt a cross the board "norm". |
Posted By: gun-driver
Date Posted: October-01-2013 at 11:46am
|
Tim can you get the 5/8 rub rail? When I ordered mine I said it was for my '85 which had the 5/8 originally and I believe Woody is the one that told me this was the replacement. I was a little bummed since I had already purchased the 5/8 rope. Maybe this would be a question for Zach. |
Posted By: Hollywood
Date Posted: October-01-2013 at 12:06pm
I've never seen an 86 or older with the 5/8". I suppose it's possible someone could have squeezed it in though. ------------- |
Posted By: Steve_SN2001
Date Posted: October-03-2013 at 1:59pm
| Sorry it's taken so long to get back on here, it's the 5/8 provided the actual rub rail comes off without breaking I just need the rope. I didn't know there was a rubber replacement for it, thats pretty interesting being as I was going with black rope to update the looks. |
Posted By: gR@HaM
Date Posted: October-03-2013 at 2:33pm
|
if youre willing to splash the cash i would buy new rub rail n'all, certainly freshens up the boat http://www.go2marine.com/product/163291F/1-1-4-flexible-vinyl-rub-rail-kit-1-1-4-h-x-15-16-w.html" rel="nofollow - with 1/2" rubber insert ------------- '82 Ski Tique |
Posted By: baitkiller
Date Posted: October-03-2013 at 8:32pm
|
I went to the hardware store and bought a small piece of each size rope then went home and test fit. Worked for me. ------------- Jesus was a bare-footer............. |