Intake Manifold
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=31979
Printed Date: October-08-2024 at 5:14pm
Topic: Intake Manifold
Posted By: jacmurr
Subject: Intake Manifold
Date Posted: November-09-2013 at 6:20pm
|
I got a new 351W long block for my '76 CC 210 Cuddy. Now I need a new intake manifold for it. Are the intake manifolds different on reverse rotation engine? or will any intake work? Is there a better intake available than the stock one? Where would be the best place to look? ------------- Jack's Off |
Replies:
Posted By: Gary S
Date Posted: November-09-2013 at 7:03pm
|
You don't have any choice seeing where you live. You'll have to go with a oem cast iron one. Any one from a 351W will work,2 or 4bbl depending on what carb you have. There are a couple on ebay right now,not as cheap as you'd think. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: 62 wood
Date Posted: November-09-2013 at 10:56pm
|
Jack, I am parting out a 351 and have a 4 bbl stock intake available. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1117&sort=&pagenum=6" rel="nofollow - 64 American Skier 62 Classic.. 73 Ski Nautique |
Posted By: jblocal
Date Posted: November-10-2013 at 9:42pm
| Sorry to jump in, I have an aluminum intake on my 351w that I raw water cool in salt water. I have read some neg things on this. How concerned should I be? What I need to look for? So far it's been on there for almost 3 years and looks fine to me. I flush really good after every use and boat stays on trailer. |
Posted By: Gary S
Date Posted: November-10-2013 at 10:43pm
|
I pulled mine a few years ago when changing heads,it had been on for about 15 yrs in fresh water. There was some minor corrosion. You could pull your thermostat and look in,you won't see it from the outside, if you were worried. Salt,water,dissimilar metals don't mix ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: jacmurr
Date Posted: November-11-2013 at 8:34am
|
ah ha! I was wondering about that because so far all I can find is aluminum. ------------- Jack's Off |
Posted By: Hollywood
Date Posted: November-11-2013 at 10:30am
|
Kind of surprised one of the guys with a H/C/I upgrade hasn't offered up a stock one for sale yet.. ------------- |
Posted By: 62 wood
Date Posted: November-11-2013 at 10:35am
 . ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1117&sort=&pagenum=6" rel="nofollow - 64 American Skier 62 Classic.. 73 Ski Nautique |
Hollywood wrote: