Parting out 1975 ski nautique
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=3215
Printed Date: November-22-2024 at 12:14pm
Topic: Parting out 1975 ski nautique
Posted By: pennnamebooks
Subject: Parting out 1975 ski nautique
Date Posted: March-19-2006 at 8:19pm
I am parting out my 1975 correct craft ski nautique. This boat started up entirely on its own one night while it was in a parking lot of a local repair shop. The video surveillance camera captured the whole thing. After burning for about 20 minutes the fire department was able to put it out. My loss is your gain. There are many perfectly useable parts from this boat. I have put the exhaust manifolds on ebay and over the course of the next few weeks I will be putting many other parts on ebay. If you need anything specific please email me at mattpenn15@hotmail.com I might be willing to sell the trailer also
|
Replies:
Posted By: Bman
Date Posted: March-21-2006 at 11:48am
How about the gas cap? just the screw in bit? will need posting to UK but will paypal u?
|
Posted By: nautiquefanatic
Date Posted: March-21-2006 at 1:45pm
Matt, email sent with purchase requests!!! Please call me!
PC
|
Posted By: josh84/2001
Date Posted: March-21-2006 at 3:29pm
do you have the water filter, or did that melt
|
Posted By: Mark Mel
Date Posted: March-22-2006 at 8:58am
Swim platform brackets?
------------- http://www.correctcraftfan.com/diaries/details.asp?ID=972&sort=&pagenum=4&yrstart=1976&yrend=1980" rel="nofollow - 1978 Nautique
FBook - www.facebook.com/charliedontsurfct
|
Posted By: woodboy
Date Posted: March-22-2006 at 5:10pm
how much for the swim platorm if in good shape thanks Rob
------------- Lake Livin' Rocks
|
Posted By: bwooton
Date Posted: March-23-2006 at 6:29am
do you have the bar that goes accross the back?
------------- Thanks Bobby
there's no replacement for displacement
|
Posted By: 3evtor
Date Posted: March-27-2006 at 5:36am
Hi, I need the seat frame and floor mounts for the observers seat. Do you still have the airguide speedos for this boat? Thanks, Mark
email me at liquidsports@hotmail.com Thank you.
|
Posted By: nautique74
Date Posted: March-31-2006 at 12:22pm
Do you have the chrome Correct Craft emblems that go on the side of the boat?
------------- 1974 Ski Nautique
|
Posted By: bhgran
Date Posted: April-12-2006 at 10:10pm
Hi,
Interested in the stern light base. I have a 73 Mustang with a base that both pins are broken off. I believe your 75 has the same one.
Thanks,
Bruce Gran
------------- Bruce Gran
bhgran_ct@yahoo.com
Connecticut
|
Posted By: ScottZ
Date Posted: April-19-2006 at 9:29am
Is this boat still available and still being parted out? If so, I am looking for a center fin (skeg), a strut, and possibly a rudder. Would you let me know if these are available?
------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier
|
Posted By: 86SN2001
Date Posted: April-19-2006 at 12:44pm
Do you have the loop that was atop the plylon for the rope?
|
Posted By: pennnamebooks
Date Posted: April-19-2006 at 1:06pm
Dear Correct Craft Fans,
I am sorry for not realizing that I had a bunch of questions regarding my 75 CC that I am parting out. I have been busy ebaying stuff and didn't know to check back on this site frequently. I will try to answer each question tonight 4/19/06. Unfortunately, many interior parts burned up but some things are OK. Their have been many inquiries about the ski platform. It is aftermarket (not original) and has two brackets plus it bolts on to the ladder. If you are interested in this I can send pictures. The platform itself is not wood and you wouldn't want to ship it - it isn't worth it.
Matt
|
Posted By: pennnamebooks
Date Posted: April-19-2006 at 1:08pm
Bman wrote:
How about the gas cap? just the screw in bit? will need posting to UK but will paypal u? | Yes, I have it. Mailing to the UK is very expensive I have found. I will weigh it and get you a quote on USPS.com Please contact me directly at mattpenn15@hotmail.com
Matt
|
Posted By: pennnamebooks
Date Posted: April-19-2006 at 1:10pm
86SN2001 wrote:
Do you have the loop that was atop the plylon for the rope? | Yes I have it but the finger has come unattached (I do have the finger). I was going to see if I could JB weld it someday but never got around to it. I can send you a picture of it if you email me at mattpenn15@hotmail.com. Remind me of what part you want because I am getting a lot of parts questions. Thanks, Matt
|
Posted By: pennnamebooks
Date Posted: April-19-2006 at 1:14pm
ScottZ wrote:
Is this boat still available and still being parted out? If so, I am looking for a center fin (skeg), a strut, and possibly a rudder. Would you let me know if these are available? | Scott, I sold the rudder on ebay. Yes, I have the fin, in fact there are two of them. I am not sure what you mean by strut. I am learing a lot after taking this thing apart but I am not super knowledgable about the nomenclature. Do you mean the beams struts that the engine rides on? Contact me directly at mattpenn15@hotmail.com
|
Posted By: pennnamebooks
Date Posted: April-19-2006 at 1:14pm
josh84/2001 wrote:
do you have the water filter, or did that melt | Water filter is gone. Sorry
|
Posted By: pennnamebooks
Date Posted: April-19-2006 at 1:16pm
Mark Mel wrote:
Swim platform brackets? | I can send pictures. Please read the post I sent about the platform. I am from New Milford originally (Lake Zoar Ct. I presume). mattpenn15@hotmail.com
|
Posted By: fredo68
Date Posted: April-19-2006 at 1:28pm
HOW ABOUT THE PROP SHAFT, STRUT,COUPLER AND
VELVET DRIVE
NEED IT FOR A 66 MUSTANG WONDER IF ANYONE
KNOWS IF THEY INTERCHANGE
THANKS FREDO68
------------- fredo68
|
Posted By: josh84/2001
Date Posted: April-19-2006 at 9:21pm
do you still have the trailer I need one for a 98 cc I,m local in tampa
|
Posted By: ScottZ
Date Posted: April-20-2006 at 9:56am
The above items will not interchange. The hulls are different lengths. These parts between these 2 boats are different.
------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier
|
Posted By: ScottZ
Date Posted: April-20-2006 at 9:57am
The trailer is too small.
------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier
|
Posted By: pennnamebooks
Date Posted: April-20-2006 at 10:17am
nautiquefanatic wrote:
Matt, email sent with purchase requests!!! Please call me!
I'm sorry, did I get to your request via my email account? If not email me again - mattpenn15@hotmail.com
PC |
|
Posted By: pennnamebooks
Date Posted: April-20-2006 at 10:20am
ScottZ wrote:
HOW ABOUT THE PROP SHAFT, STRUT,COUPLER AND
VELVET DRIVE
NEED IT FOR A 66 MUSTANG WONDER IF ANYONE
KNOWS IF THEY INTERCHANGE
The above items will not interchange. The hulls are different lengths. These parts between these 2 boats are different. | Scott Z, Please email me mattpenn15@hotmail.com. I have a 67 Mustang that I need to do some major repairs on. I need some pictures of yours so that I can see where some original things went. Where are you located? Thanks, Matt
|
Posted By: nautiquefanatic
Date Posted: April-20-2006 at 10:33am
Matt, please call me, I need some items!!!!! Paul (980)581-0006
|
Posted By: 86SN2001
Date Posted: April-20-2006 at 10:42pm
Matt will you call me @704-853-0833? I emailed you a day or two ago but have not heard back in reference to the loop and finger for the pylon. Thanks Eric
|
Posted By: DrCC
Date Posted: May-12-2006 at 10:10am
Matt,
I'm looking for a White-face Airguide speedometer, that reads mph on the outer part of the circle.
I would also be glad to help with any questions you have on your '67 Mustang. I have a '66 I'm parting out. Owned since 1980, restored twice.
Thanks AT
|
Posted By: 67nautique312
Date Posted: May-12-2006 at 2:11pm
Did you sell the swim plattform and the brackets or did MarkMel pick those up??
Thanks paul (913)-219-3402
------------- 1963 Classic (handed down to my daughter) 67 Riviera 68 barracuda 1971 Ski Nautique Promo 86 Silver Nautique 1995 Ski Nautique
|
Posted By: ScottZ
Date Posted: May-22-2006 at 9:55am
Matt,
Do your have the "screw knobs" that are used to fasten the driver's and observer's seat to the floor mounted bracket or were they destroyed in the fire?
------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier
|
Posted By: cjhelbig
Date Posted: August-08-2006 at 4:08pm
looking for drive shaft and strut, and rudder
|
Posted By: MaddMarxx
Date Posted: August-08-2006 at 8:12pm
do you still have the helm and if you do how much? maddmarxx@aol.com
|
|