Borg Warner Problems
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=3226
Printed Date: November-23-2024 at 10:03am
Topic: Borg Warner Problems
Posted By: big_bry20
Subject: Borg Warner Problems
Date Posted: March-21-2006 at 5:33pm
|
I am having problems with my Borg Warner 71c transmission. It shifts into reverse, but makes a chattering noise once it is in. It does not shift into forward drive at all. I've checked all linkages and levers; everything is moving. Any advice as to diagnosing and fixing the problem?
|
Replies:
Posted By: rmcdonald
Date Posted: March-21-2006 at 8:27pm
Hi
Have you checked the oil level in gearbox.
Also check the linkage at the box, There is a spring loaded ball bearing that locates the lever into forward,Neutral and Reverse.
Also under the Reference section from on this site are the workshop manuels for the gearbox.
Regards
Rob McDonald
|
Posted By: David F
Date Posted: March-22-2006 at 8:08am
Clattering noise and now forward...I am guessing a broken internal part. I think someone else had a similiar experiece not to long ago and even posted a picture of the broken ring gear or some other part. Do a search (I am to lazy right now).
Sounds like it might be time for a rebuild.
|
Posted By: john33617
Date Posted: March-22-2006 at 12:02pm
|
reverse plates break alot , but you should still have fwd , take it apart and see , cheap and easy to rebuild , this kit is the best buy , has plates and seals for 75$. http://www.amarket.com/imabw071.htm
|
Posted By: john33617
Date Posted: March-22-2006 at 12:12pm
|
when the reverse plate breaks it takes out the springs , I think it takes 12 , http://www.skidim.com/prodinfo.asp?number=R046001
|
Posted By: john33617
Date Posted: March-22-2006 at 12:17pm
|
and check that damper , http://www.skidim.com/prodinfo.asp?number=R140001
|
Posted By: Bob's2001
Date Posted: March-23-2006 at 10:19pm
Sounds like rebuild time. I did mine a while back & spent around $400. Links to some pics. http://photobucket.com/albums/d199/TexasBob/ - trans pics
-------------
Bob Ed
83 2001
|
Posted By: Rick
Date Posted: March-29-2006 at 9:31pm
I took mine to the local BW shop. $950 for a complete rebuild with a 1 year warranty.It looks like several people have done it themselves It turns out mine had a bent main shaft which was about 350. If you do rebuild it make sure everything is within spec or you will just be rebuilding trouble.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=250&yrstart=1996&yrend=2000%20" rel="nofollow - 2000 Ski
|
Posted By: john33617
Date Posted: March-30-2006 at 5:50am
|
you can find brand new ones for 950 , just get the kit from amarket for 75$ and take your time , but put a new damper plate , they can let go at any time , your problem sounds like the rev plate is broke , very easy to fix. http://bpi.ebasicpower.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=eBasicPower&Product_Code=BOR1017-000-004T&Category_Code=ALL3D
|
|