New rudder needed
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=32311
Printed Date: November-17-2024 at 1:47pm
Topic: New rudder needed
Posted By: d4vy
Subject: New rudder needed
Date Posted: November-27-2013 at 1:57pm
|
Heya, Does Anyone have any ideas where I can get a new rudder for my nautique 2001? Thanks |
Replies:
Posted By: phatsat67
Date Posted: November-27-2013 at 4:13pm
|
The only new rudder available would be from a dealer (ie. me). I ship globally but they aren't cheap. They all have the tunable fin now. The only other option would be to wait until a used piece comes on the market. ------------- |
Posted By: Air206
Date Posted: November-27-2013 at 5:20pm
|
Don't Know What You Need But I Have A New And A Used 27-A Rudder... ------------- https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206 http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot 78 SkiTiq |
Posted By: TRBenj
Date Posted: November-27-2013 at 5:36pm
| He needs an 11A with a 1-1/4" shaft for his 2001 (the 27A has a 1" shaft)... or a new tabbed rudder, which would encroach on the $600 mark. The 27A's are relative bargains, as theyre available for ~$280 new... too bad it wouldnt work for him. |
Posted By: phatsat67
Date Posted: November-27-2013 at 5:48pm
|
Tim, I am thinking about having a pour done of the original 11A. If I could get them down 300 bucks less or so I think they would probably sell like wild fire VS. the new tabbed rudder. I assume I would have to make a somewhat sizeable investment to do so. Haven't researched the company yet. I think Bruce told me they still have the casting stats to pour it. ------------- |
Posted By: 8122pbrainard
Date Posted: November-29-2013 at 8:22pm
Davy, What's up with your old one? If bent they can be straightened if not real bad. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
d4vy wrote:Posted By: Florida Inboards
Date Posted: November-30-2013 at 10:09am
|
I just pulled a 11-A out of a 80 SN and I am scrapping the the rest of the boat. ------------- Money Talks! BS Walks! and loose change rides the bus!!! |
Posted By: d4vy
Date Posted: January-26-2014 at 10:22pm
| Just saw Ur post as I managed to lose this thread.. Do u still have the 11a rudder? |
Posted By: watrski
Date Posted: January-31-2014 at 12:29pm
|
I have a 11A that I would like to sell. Please contact me. tim.cochrane@gmail.com ------------- Tubing Sucks. |
Posted By: 8122pbrainard
Date Posted: January-31-2014 at 9:08pm
------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: TRBenj
Date Posted: January-31-2014 at 9:48pm
| Pete, what are the limitations of a rudder repair? Bent shaft vs. bent blade, shearing/cracking repairable? I've got a few that are tweaked. Wouldn't trust anyone around here to know what they're doing... and don't want to ship them out if they can't be fixed. Any insight or would you have to see them in person? |