Ford FE Cooling System Parts Needed!!!
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=32723
Printed Date: November-17-2024 at 12:47pm
Topic: Ford FE Cooling System Parts Needed!!!
Posted By: Cuda Chris
Subject: Ford FE Cooling System Parts Needed!!!
Date Posted: January-24-2014 at 6:11pm
|
I have exhauseted all of my parts resources and have spent the last 2 months searching the internet and making countless phone calls. I have every part but what is listed below. Parts option 1: 1. Raw water pump, pulley and bracket (mounted off to the side directly to the recirculating pump) 2. Thermostat housing Photo of similar engine set up and circulating system  Parts option 2: 1. Raw water pump and pulley (older style mounted low on the engine directly to the mounting bracket/oil pan) 2. Oil pan with mounting points for engine mounting bracket 3. Water necks that mount to the front of the block in place of the automotive style recirculating pump. Photo of similar engine set up and circulating system  I recognize these are probably the hardest parts to find but they are a must and I am preapred to... well,,, pay. I have not problem making a road trip or splurging on shipping. If anyone has a contact, knows where a rusty hulk of an engine is or has a buddy with something similar on a shelf PLEASE let me know. Thanks! ------------- 1968 Barracuda Super Sport |
Replies:
Posted By: Riley
Date Posted: January-24-2014 at 7:39pm
| Have you tried? He had those parts awhile back. |
Posted By: uk1979
Date Posted: January-24-2014 at 8:02pm
|
option 2 has been on ebay for months 171038535580 you just switch the pulley side round to the back of housing turn over to change rotation of pump ------------- Lets have a go 56 Starflite 77 SN 78 SN 80 BFN |
Posted By: Cuda Chris
Date Posted: January-24-2014 at 8:09pm
|
Hi Bruce - I spoke to him twice and he seems to think that he sold the pump but was not sure about the thermostat housing. I emailed him today and will see if he responds. Thanks! ------------- 1968 Barracuda Super Sport |
Posted By: Cuda Chris
Date Posted: January-24-2014 at 8:13pm
|
UK - I have seen a pump and engine mount but that will require an oil pan that is just as rare as the other parts. I may just bite the bullet and get those items off ebay tonight. ------------- 1968 Barracuda Super Sport |
Posted By: Cuda Chris
Date Posted: January-24-2014 at 10:32pm
|
If I could just find that side mounted pump and bracket I'd be in good. Would rather not have to source a different oil pan, engine mount, fittings etc... ------------- 1968 Barracuda Super Sport |