Print Page | Close Window

New Gauges Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=33170 Printed Date: November-17-2024 at 6:47pm Topic: New Gauges Posted By: td_in_nc Subject: New Gauges Date Posted: March-25-2014 at 7:45pm I had a couple other post on dealing with bad gauges on my Supra. They are Medallion II with control module. After trouble shooting, emailing Medallion and reading up on these gauges, I am considering taking a new approach, as I do not want to purchase any more gauges (two are bad and I am still hunting for the bad connection in the wiring harness). There is no reason in my mind to spend a dime on a system which will only likely have problems again. So this is what I am thinking. Buying set boat gauges off of ebay (gas, volt, temp and fuel) and installing them by running new wires from the sender, power source and ground. I may have to get new sending units, but I am hoping the original ones will work. I feel this way I at least know what is happening and I am in control of my own destiny.    Does this seem like a logical approach? Replies: Posted By: Waterdog Date Posted: March-26-2014 at 8:48am There's a web site called Great Lakes Skipper that sells ALL kinds of over stock boat parts - It's worth a look ------------- - waterdog - http://www.correctcraftfan.com/diaries/details.asp?ID=3896&sort=&pagenum=2&yrstart=1978&yrend=1978" rel="nofollow - 78 Ski Tique

Print Page | Close Window