Stringer Rebuild in 1977 Mustang 17
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=33230
Printed Date: November-17-2024 at 7:31pm
Topic: Stringer Rebuild in 1977 Mustang 17
Posted By: gasman42
Subject: Stringer Rebuild in 1977 Mustang 17
Date Posted: April-02-2014 at 6:15pm
Guys my question is ?
Since my entire stringers system.... main and sec ...are complete mush ! GONE ? and the glass around them cracked and missing?
There is not really anything to remove to make a template .. does someone make these, based of old measurements from Correct Craft ? and or does anyone here have those factory measurements or drawings ?
Thanka in advance .
BC
|
Replies:
Posted By: 8122pbrainard
Date Posted: April-02-2014 at 10:35pm
Brad,
Get every measurement you can now before tearing out the stringers. You will need to do some educated guessing since I know of no templates.
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
Posted By: 74Wind
Date Posted: April-03-2014 at 12:40am
Some "Before" photos might help the stringer wizards on the site advise you on the process.
-------------
1974 Southwind 18
1975 Century Mark II
|
Posted By: farmer
Date Posted: April-21-2014 at 11:21pm
I'm in the middle of a 77 mustang stringer job.I still have the old stringers. If you are really stuck I could probably trace them to give you an idea. Let me know how you make out.
-------------
Watch your fingers.
|
|