Print Page | Close Window

Oil Pressure switch? Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Engine Repair Forum Discription: Engine problems and solutions URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=33282 Printed Date: October-08-2024 at 3:29pm Topic: Oil Pressure switch? Posted By: marmon77 Subject: Oil Pressure switch? Date Posted: April-07-2014 at 4:41pm The oil pressure gauge in my 1988 SN2001 stays pegged to the right when I start up the boat and run it. I switched out the pressure switch on the engine but it still stays pegged to the right. How or what can I or should I check next? Thanks Replies: Posted By: backfoot100 Date Posted: April-07-2014 at 5:32pm Sounds like the sender lead is being grounded someplace. Time to break out the volt/ohm meter and start tracing the sender lead back to the gauge. Did you make sure that you matched the sender ohm value to the gauge when youreplaced it? What happens if you disconnect the sender lead from the sender? The guage still pegs or no? ------------- When people run down to the lake to see what's making that noise, you've succeeded. Eddie Posted By: marmon77 Date Posted: April-07-2014 at 8:01pm I will have to check it more closely and see. I'll post back when I do. Thanks

Print Page | Close Window