Fish Nautique RUDDER
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=33636
Printed Date: November-17-2024 at 9:45am
Topic: Fish Nautique RUDDER
Posted By: DayTony
Subject: Fish Nautique RUDDER
Date Posted: May-20-2014 at 12:57am
I know its asking a lot since not many of these are around but i'm looking for a rudder for my 78'
I built one last year out of steel that worked great but it was a test. i wanted to reach out and see if i can pick up an original before i go ordering the stainless to build a permanent replacement.
open to suggestions.
|
Replies:
Posted By: ScottZ
Date Posted: May-23-2014 at 11:26am
I have one that came out of a Southwind and one that came out of a 1986 Marinique (also a deep v boat).
-------------
Scott Zuelzke
Lake Mitchell , AL
1984 Ski Nautique
1972 Skier
|
Posted By: TRBenj
Date Posted: May-23-2014 at 3:16pm
|
SW and Martinique both use the same 11a found on Ski Nautiques. No idea if the larger Fish uses the same. The 11a has a 1-1/4" shaft, so that would be one way to check.
|
Posted By: DrCC
Date Posted: May-23-2014 at 3:23pm
|
I think yes, same one Tim.
|
Posted By: Gary S
Date Posted: May-23-2014 at 3:57pm
Didn't Zach post a sheet a few years ago with struts shafts and rudders ? I'll see if I can find it
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS
95 Nautique Super Sport
|
Posted By: DayTony
Date Posted: May-23-2014 at 4:14pm
thanks, Let me go check right now what the diameter is. and the depth of the mount.
|
Posted By: Gary S
Date Posted: May-23-2014 at 4:14pm
http://www.correctcraftfan.com/forum/forum_posts.asp?TID=27919&KW=strut&PID=357828&title=factory-rudder-and-strut-info-for-60s-70s-80s#357828" rel="nofollow - Here is everything you need to know thanks to Zach
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS
95 Nautique Super Sport
|
Posted By: DayTony
Date Posted: May-23-2014 at 4:28pm
That list may be wrong because i just checked and my shaft dia. is 1.25 and that list says 23' fish as 1 1/8.
Either way if the rudder you have is the 1.25" shaft and the length from the top of the rudder to end of the shaft is around 6".
(when i got the boat it had the wrong rudder so i cant cross reference.)
|
Posted By: DrCC
Date Posted: May-23-2014 at 4:53pm
The 1 1/8" would be the prop shaft column.
11A - rudder column
|
Posted By: DayTony
Date Posted: May-27-2014 at 8:54pm
Looks like the 11a is going to be the correct rudder that it would have come with.
Are there any larger rudders that were available /interchangeable with the 11a?
|
|