Print Page | Close Window

Parting out 1979 Ski Nautique

Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=34006
Printed Date: November-30-2024 at 9:48pm


Topic: Parting out 1979 Ski Nautique
Posted By: merrittarnold
Subject: Parting out 1979 Ski Nautique
Date Posted: June-28-2014 at 10:56pm
Too much wood rot to keep. Everything else is great. What do you need?

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!



Replies:
Posted By: baitkiller
Date Posted: June-28-2014 at 11:16pm
Doesn't sound like much but i need one of the plastic inserts that cover the screw track in the windshield.
I also need the steering wheel center cap and mount

-------------
Jesus was a bare-footer.............


Posted By: 8122pbrainard
Date Posted: June-28-2014 at 11:35pm
Originally posted by merrittarnold merrittarnold wrote:

Too much wood rot to keep. Everything else is great. What do you need?

Merritt,
Are you kidding?!! Haven't you seen the stringer threads???? You are killing a classic!!

-------------
/diaries/details.asp?ID=1622" rel="nofollow -

54 Atom

/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique

64 X55 Dunphy

Keep it original, Pete
<


Posted By: merrittarnold
Date Posted: June-28-2014 at 11:46pm
I know. I know. I agree.
Yes, I read every thread. I spoke with professionals and took it to two different restorers. They all said I should cut my losses.
However, if you think I can sell it and some one else restore it, now is the time.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: gun-driver
Date Posted: June-29-2014 at 12:46am
Pictures??


Posted By: Robb
Date Posted: June-29-2014 at 5:41pm
Yes, pictures please. Where are you located?


Posted By: merrittarnold
Date Posted: June-29-2014 at 5:54pm
I am in Athens Georgia; about an hour east of Atlanta. I will work on pictures soon.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: 8122pbrainard
Date Posted: June-29-2014 at 8:14pm
Originally posted by merrittarnold merrittarnold wrote:

I know. I know. I agree.
Yes, I read every thread. I spoke with professionals and took it to two different restorers. They all said I should cut my losses.
However, if you think I can sell it and some one else restore it, now is the time.

Since you read all the threads, have you considered doing a stringer job yourself? It just takes time!!

-------------
/diaries/details.asp?ID=1622" rel="nofollow -

54 Atom

/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique

64 X55 Dunphy

Keep it original, Pete
<


Posted By: merrittarnold
Date Posted: June-29-2014 at 8:52pm
Of course. I considered it most thoroughly and decided it was beyond me. I have removed everything: engine, floor, exhaust, everything.
In the end, I can't do it.
We purchased a 1985 Mastercraft Stars and Stripes (the ONLY boat I would consider other than a Nautique).
Now I need to get rid of the 1979 SN. I would love to give a fantastic deal to someone willing to string it and go. If no one's willing, then parting it out to help others works for me.
How about I try to sell it first?

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: merrittarnold
Date Posted: June-29-2014 at 9:45pm


-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: storm34
Date Posted: June-30-2014 at 2:08am
Looks like a newer shaft. Can you tell if it's an ARE? If so, dibs.

-------------


Posted By: 79Monk
Date Posted: June-30-2014 at 4:51pm
I'm in need of the two vent windows, hinges and hardware. i do not need the plastic screw covers as mentioned by "baitkiller".

How much for the vent windows, hinges and hardware?


Posted By: baitkiller
Date Posted: June-30-2014 at 9:12pm
Oh I forgot... regarding vent windows I could use the adjuster brackets, complete if Monk hasn't spoken for them.

-------------
Jesus was a bare-footer.............


Posted By: Skrobo
Date Posted: July-01-2014 at 5:37pm
double post :/


Posted By: Skrobo
Date Posted: July-01-2014 at 5:38pm
What prop does it have? I may be interested. also, if baitkiller doesn't need all the adjuster brackets, can i nab just one?


Posted By: merrittarnold
Date Posted: July-01-2014 at 6:01pm
Here's the prop.
I believe it's the original. Regular use.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: merrittarnold
Date Posted: July-01-2014 at 6:04pm
This is the cast iron plate covering the horns and the air intake on the bow. I think it's gorgeous; I like it better to the wood ones. My wife painted the black into it to make it pop about five years ago.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: merrittarnold
Date Posted: July-01-2014 at 6:05pm
Baitkiller,
do you need all the adjuster brackets?


-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: baitkiller
Date Posted: July-01-2014 at 7:27pm
Yes i do and one long cover strip off the bottom front track of the windscreen and the steering wheel center with mounting plate.

-------------
Jesus was a bare-footer.............


Posted By: TRBenj
Date Posted: July-01-2014 at 8:16pm
What do you need for that bow plate? Shoot me a PM.


Posted By: speedboater
Date Posted: July-02-2014 at 9:23am
looking for a set of risers


Posted By: Thisoldboat
Date Posted: July-06-2014 at 8:27pm
What engine does it have?


Posted By: saintjon
Date Posted: July-07-2014 at 2:14am
i need the back seat and would be interested in the wiring harness...

-------------
...saintjon


Posted By: 1980nautique
Date Posted: July-07-2014 at 12:24pm
Merrit,
I am interested in the Speedos, pickups and tubes???? also need the spotter and drivers seat frames and steering wheel. Ski Mirror and brackets???


Posted By: merrittarnold
Date Posted: July-09-2014 at 1:33pm
Its easier for me to send pics by phone if possible. You can call or text me at 706-224-6082.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: merrittarnold
Date Posted: July-09-2014 at 1:41pm
It has a Ford 351 Windsor reverse rotation done by Commander instead of PCM. Very strong engine, runs great.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: speedboater
Date Posted: July-25-2014 at 6:17pm
I need a set of risers thanks johnlamer@yahoo.com


Posted By: merrittarnold
Date Posted: July-26-2014 at 10:59am
No risers. Commander didn't use them.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: captbob626
Date Posted: July-26-2014 at 8:14pm
Do you have a thermostat housing?

-------------
Bob Meimbresse


Posted By: merrittarnold
Date Posted: July-26-2014 at 9:04pm
Text me a picture at 706-224-6o82.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: beachdude24
Date Posted: July-27-2014 at 12:22am
Pm sent

-------------
Living the Salt Life...Life is better in Aruba


Posted By: nadfam
Date Posted: July-30-2014 at 3:42pm
I need a dash board do you have a picture of the one on the boat?


Posted By: merrittarnold
Date Posted: July-31-2014 at 10:43pm
I do have it. Text me at 706-224-6082. Its a lot easier for me to text or email pictures.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: MCC
Date Posted: August-04-2014 at 1:05pm
Do you still have the speedo's and steering wheel?
Also the horns if they work

Thanks Matt


Posted By: Kennisis
Date Posted: August-04-2014 at 8:34pm
I need manifolds and the starter if you still have them. PM Me please.

Thanks


Posted By: merrittarnold
Date Posted: August-05-2014 at 7:30pm
Here's what I have left:
Trailer
Hull
Cleats
Bow light
Bow plate
Blower
Steering cable
Throttle cable
Transmission cable
Wiring harness
Gas tank
Cowel


-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: captbob626
Date Posted: August-08-2014 at 6:32pm
Do you havean alternator?

-------------
Bob Meimbresse


Posted By: merrittarnold
Date Posted: August-08-2014 at 8:01pm
Engine has been sold with everything on it. So no distributor, no logs, no alternator, etc.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: lymehouse1
Date Posted: August-13-2014 at 1:29am
I'm looking for a swim platform for my '77 SN.
Previous owner painted my swim platform, it may be more trouble to strip and refinish than it's worth.
How much for your platform? (if you still have it), I'm in California so shipping may not be something you want to do, let me know.
Thanks.

Rob


Posted By: IAughtNaut
Date Posted: August-13-2014 at 4:47am
Originally posted by merrittarnold merrittarnold wrote:

There are ski boats; and there are Ski Nautiques!


Originally posted by merrittarnold merrittarnold wrote:

We purchased a 1985 Mastercraft Stars and


??

would like to see the cleats

-------------
bring the ruckus
http://www.correctcraftfan.com/diaries/details.asp?ID=5347" rel="nofollow - 2000 Pro Air


Posted By: merrittarnold
Date Posted: August-13-2014 at 8:19am
Swim platform is sold.
Text me about cleats so I can send pictures.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: rlbagley
Date Posted: August-20-2014 at 6:24pm
Was wondering if you still had the engine control shift lever? Thanks


Posted By: speedboater
Date Posted: August-20-2014 at 6:37pm
what exhaust do you have


Posted By: merrittarnold
Date Posted: August-20-2014 at 6:41pm
No exhaust left. Sold the engine.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: baitkiller
Date Posted: August-20-2014 at 6:58pm
whatever happened to the windshield vent hardware?

-------------
Jesus was a bare-footer.............


Posted By: merrittarnold
Date Posted: August-20-2014 at 8:11pm
That already sold.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: rlbagley
Date Posted: August-25-2014 at 7:31pm
do you still have the gas tank? and have any pictures of it? Thanks


Posted By: merrittarnold
Date Posted: August-25-2014 at 8:10pm
I do have the gas tank. Text me at 706-224-6082 and I can send you a picture.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: goldenrigley
Date Posted: September-16-2014 at 5:47pm
Do you still have the ski pole ?

japrickett41@gmail.com

-------------
Jim in WI


Posted By: merrittarnold
Date Posted: September-16-2014 at 6:03pm
No, I already sold the ski poll.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: NatNut
Date Posted: September-24-2014 at 2:24pm
Have you parted it all out? I am looking for a piece of glass.

-------------
I buy glass


Posted By: merrittarnold
Date Posted: September-24-2014 at 2:27pm
Fiberglass or windshield glass. Windshield is gone.

-------------
There are motorcycles; and there are Harley Davidsons.
There are tractors; and there are John Deeres.
There are ski boats; and there are Ski Nautiques!


Posted By: goldenrigley
Date Posted: September-25-2014 at 4:23am
Is the ski pylon gone?

-------------
Jim in WI


Posted By: NatNut
Date Posted: September-25-2014 at 11:44am
Thanks. I am looking for the windshield.

-------------
I buy glass


Posted By: sberard5
Date Posted: January-04-2015 at 11:05am
Just came across and figured I would see if you have anything left from the CC you are parting out??? Let me know.


Posted By: speedboater
Date Posted: January-04-2015 at 5:38pm
I have stainless exhaust manifolds no elbows 250.00 plus shiping


Posted By: 8122pbrainard
Date Posted: January-04-2015 at 5:55pm
Originally posted by speedboater speedboater wrote:

I have stainless exhaust manifolds no elbows 250.00 plus shiping

John,
For what?

-------------
/diaries/details.asp?ID=1622" rel="nofollow -

54 Atom

/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique

64 X55 Dunphy

Keep it original, Pete
<


Posted By: Fabcon
Date Posted: January-04-2015 at 10:22pm
Do you still have the trailer and where are you located?

-------------
1976 Ski Nautique 351 Escort
1984 Barefoot Nautique (Parting Out)


Posted By: speedboater
Date Posted: January-05-2015 at 5:34pm
they are ford camander stainless 351 or 302



Print Page | Close Window