Perfect Pass
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=34167
Printed Date: November-17-2024 at 12:39pm
Topic: Perfect Pass
Posted By: AAM196
Subject: Perfect Pass
Date Posted: July-16-2014 at 6:14pm
|
Anyone ever replace paddle wheel in Perfect Pass? Mine seems to loose accuracy at times esp around 40mph. Would a new Paddle wheel help?
|
Replies:
Posted By: TX Foilhead
Date Posted: July-17-2014 at 1:29am
|
Upgrade to Stargazer and you won't have to change it out. If it it looses accuracy above a certain speed I would guess there is some turbulence it's picking up so you might want to change the location . Probably easiest to leve the current one in place and add another than it would be to drill a new hole and move the current paddle wheel and fix the old hole.
|
Posted By: TX Foilhead
Date Posted: July-17-2014 at 1:36am
|
A second thought, switch to RPM mode at those speeds which should turn the paddle wheel off. I know PP prefers RPM's for slalom so they should be good for higher speeds.
|
Posted By: AAM196
Date Posted: July-21-2014 at 4:27pm
Yeah, I use the RPM for slalom... just trying to get the speed accurate as well for kicks. I'd go GPS route if I didn't boat on rivers.
My paddle is right where it says to install beside drain plug.
|
|