WANTED: GT40
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=345
Printed Date: December-04-2024 at 9:34pm
Topic: WANTED: GT40
Posted By: fullerthrottle
Subject: WANTED: GT40
Date Posted: May-03-2004 at 5:34pm
|
Looking for new or used complete engine, anyone have one or know where to buy one?
|
Replies:
Posted By: Guests
Date Posted: May-05-2004 at 6:08pm
I have a PCM 351-290 h.p. HO motor, complete front to back, top to bottom, low hour,1999 take out in perfect condition for $2,000.
Also, I have a PCM Apex 350-320 h.p.mulitport engine, 100%complete, new and in factory crate. Includes pump, starter, alternator, mounts, bell housing, etc. for $4,500
Let me know if interested.
|
Posted By: fullerthrottle
Date Posted: May-06-2004 at 5:18pm
|
Yes I am interested in either, but if I use the Chevy motor do you know what would have to done to the wiring, and do you have the hours on the 351? and does it come all of the stuff like the 350?
|
Posted By: 2trickpony
Date Posted: May-07-2004 at 2:28pm
Both engines are complete, less transmissions
(tranny available). Wiring should be very similar as both are PCM/Correct Craft built. Hours on 290 are in the vicinity of 190. In the past we installed EFI motors in carb boats and had no difficulty. I believe the main engine wiring connector is the same.
Buckwheat
-------------
buckwheat
|
Posted By: fullerthrottle
Date Posted: May-07-2004 at 7:44pm
|
I would rather go with a Chevy motor if it is going to be a similar wiring harness, Iam also interested in a new tranny, how much? email me ; fullerthrottle@msn.com
|
Posted By: danman
Date Posted: May-10-2004 at 12:07am
whomever has the 1999 complete pcm 351 take out please email pics and or more of a description (i.e. location, hours, reason for removal) danmalkowski@hotmail.com
thanks!
|
|