Ski Nautique 2001 Shift/Throttle control
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=34533
Printed Date: November-17-2024 at 11:21am
Topic: Ski Nautique 2001 Shift/Throttle control
Posted By: marmon77
Subject: Ski Nautique 2001 Shift/Throttle control
Date Posted: August-29-2014 at 7:34pm
| Looking either to buy or have my shift/throttle control repaired. Is there someone on here that repairs them or should I look to buy one? Thanks |
Replies:
Posted By: KRoundy
Date Posted: August-29-2014 at 11:52pm
|
First off - what is wrong with it? They can be repaired and are actually quite simple devices. http://www.correctcraftfan.com/forum/forum_posts.asp?TID=24751&title=mv1-stepbystep-teardown-clean-and-assemble" rel="nofollow - From CCF FAQ Tell us what is wrong and then we can help steer you in the right direction. ------------- Previous: 1993 Electric Blue/Charcoal Ski Nautique Current: 2016 Ski Nautique 200 Open Bow |
Posted By: marmon77
Date Posted: September-01-2014 at 8:09pm
| The lever seems to not center after it's put in gear then returned to neutral. If that makes sense |
Posted By: DrCC
Date Posted: September-01-2014 at 8:41pm
|
Your pre-load spring for the throttle cable is too tight. Adjust the brass barrel for less tension. Adjust at the Morse. Not the carb. |
Posted By: marmon77
Date Posted: September-01-2014 at 10:20pm
| Thanks DrCC but could you elaborate more? Brass barrel, Morse? |
Posted By: marmon77
Date Posted: September-01-2014 at 10:45pm
DrCC, read entire post know what Morse is  but not brass barrel
|
Posted By: JPASS
Date Posted: September-01-2014 at 10:48pm
Morse refers to the type of throttle you have in your boat. Brass barrel refers to where the cable attaches to the throttle lever side of the controls. ------------- '92 Correctcraft Ski Nautique |
marmon77 wrote: