Print Page | Close Window

2014 fall shop clean out

Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=34561
Printed Date: November-30-2024 at 3:41pm


Topic: 2014 fall shop clean out
Posted By: Fl Inboards
Subject: 2014 fall shop clean out
Date Posted: September-03-2014 at 1:34pm
2014 Fall Florida Inboards clean out.
1. Fish Nautique rudder 1977   $75
2. Malibu Fins 1990           $75
3. Malibu Pylon. Needs polish $100
4. Fish Nautique Strut needs bushing $50
5. Nautique Rudder port SN/196       $40
6. 1" Shaft coupling "New" Brass     $40
7. Top mount Bell housing "Chris Craft" $75
8. Ford PCM Engine mounts 1:1 trans   $35
8. Chevy SBC PCM Engine mounts        $35
9. Deck mount wide Mirror (Truck Style) $40
10. Fuel filter assy needs cartridge    $40
11. 1" brass packing glands (2)        $15 ea


Not pictured:
12. BBC Oval port Cast Iron intake Holley bolt pattern $125
13. Ford 351 GT-40 heads $500
14. New never mounted 351/302 PCM Bell housing $300
15. 2 Recently refurbed 14X16 OJ Propellers. Very nice $175 each
16. 6 liter PCM Exhaust manifolds and risers $500 New condition
17. 5.7/5.0 PCM Exhaust manifolds and risers New condition $500

Thought I would give you all first pickins before it goes to ebay, Swap meet or scrap. All prices OBO and does not include shipping.

Fall is for Skiing!!

Jody

-------------
Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.




1993 Shamrock "fat" 20. 2008 Nautique 196 5.0



Replies:
Posted By: Fl Inboards
Date Posted: September-17-2014 at 3:11pm
Originally posted by Fl Inboards Fl Inboards wrote:

2014 Fall Florida Inboards clean out. Up dated
1. Fish Nautique rudder 1977   $75
2. Malibu Fins 1990           $75
3. Malibu Pylon. Needs polish $100
4. Fish Nautique Strut needs bushing $50
5. Nautique Rudder port SN/196       $40
6. 1" Shaft coupling "New" Brass     $40
7. Top mount Bell housing "Chris Craft" $75
8. Ford PCM Engine mounts 1:1 trans   $35
8. Chevy SBC PCM Engine mounts        $35
9. Deck mount wide Mirror (Truck Style) $40
10. Fuel filter assy needs cartridge    $40
11. 1" brass packing glands (2)        $15 ea



Not pictured:
12. BBC Oval port Cast Iron intake Holley bolt pattern $125
13. Ford 351 GT-40 heads $500
14. New never mounted 351/302 PCM Bell housing $300
15. carpet overlay Gray, fits 90's-2009 Ski nautique and 206. Very nice        condition $150 plus shipping.
16. Lots of GT-40 stuff, complete induction mount on your engine. make offer.
17. Malibu trailer single axle a euro f-3 came off of it.
18. 1979 Ski Nautique Hull and engine box. make offer
19. 5.7 vortec carb engine nice! bob tail $3,500.00

Thought I would give you all first pickins before it goes to ebay, Swap meet or scrap. All prices OBO and does not include shipping.

Fall is for Skiing!!

Jody


-------------
Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.




1993 Shamrock "fat" 20. 2008 Nautique 196 5.0


Posted By: Air206
Date Posted: September-19-2014 at 10:11am
Jody -
PM sent.......... Steve

-------------
https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206
http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot
78 SkiTiq


Posted By: TRBenj
Date Posted: September-19-2014 at 10:36am
Jody, still awaiting a response on the carpet overlay- sent you a pm on wed. Just FYI!


Posted By: Air206
Date Posted: September-19-2014 at 11:01am
Ha Tim.... so did I! Haven't heard either......

-------------
https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206
http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot
78 SkiTiq


Posted By: TRBenj
Date Posted: September-19-2014 at 11:08am
Well hopefully I got the drop on you because it would work great in the Crush! Never done Xmas shopping this early but what the heck.


Posted By: Air206
Date Posted: September-19-2014 at 11:22am
Probably not..... you're a bigger cheap skate than I am.......! Ha!

My exposure to Quinner's carpet made me interested.

-------------
https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206
http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot
78 SkiTiq


Posted By: Gary S
Date Posted: September-19-2014 at 11:37am
I don't even want to know if the carpet matches the drapes

-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS
95 Nautique Super Sport


Posted By: TRBenj
Date Posted: September-19-2014 at 12:10pm
Cheapskate, what the? I was just curious if I had inquired first or not!

I've been casually looking for one of these since they were discontinued almost 10 years ago. I definitely do not want to hear about quinners carpet!


Posted By: Hollywood
Date Posted: September-19-2014 at 12:27pm
Lots of gray I'm sure...

-------------


Posted By: Air206
Date Posted: September-19-2014 at 1:11pm
Originally posted by Air206 Air206 wrote:


My exposure to Quinner's carpet made me interested.


I guess I should have been more specific to avoid mis-understanding....

My exposure to Quinner's GRAY carpet overlay.......

there, that should help......

-------------
https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206
http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot
78 SkiTiq


Posted By: Fl Inboards
Date Posted: September-19-2014 at 1:23pm

Absolutely Free 1979 Ski Nautique (Hull only). I will haul as far north as Valley Alabama next weekend on my flatbed. Again this is hull only.....No underwater gear, no drive train....no nothin!!! Free or next Thursday I haul it to the landfill here in Bay county.

Yes I got the e-mails about the carpet overlay, the overlay is nice and no i will not take less than my advertised price plus shipping.
Steve had asked me about this a year ago so Steve has first dibs on the carpet.

Cheers!





-------------
Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.




1993 Shamrock "fat" 20. 2008 Nautique 196 5.0


Posted By: TRBenj
Date Posted: September-19-2014 at 1:28pm
Just kidding about the "Obo" part, right Jody? Lol.

As indicated in my pm, just waiting for a shipping quote!


Posted By: Air206
Date Posted: September-19-2014 at 1:46pm
Thanks for the update Jody..... I'll take a shipping quote.... Zip=24018

-------------
https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206
http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot
78 SkiTiq


Posted By: quinner
Date Posted: September-19-2014 at 2:40pm
I would make them wrestle for it


Posted By: Air206
Date Posted: September-19-2014 at 2:42pm
I am fat, old and out of shape..... but willing to cheat!

-------------
https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206
http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot
78 SkiTiq


Posted By: quinner
Date Posted: September-19-2014 at 3:05pm
Pink Jello


Posted By: Air206
Date Posted: September-19-2014 at 3:08pm
I am sooooo in!   

BTW - great thread-jack.... at least it bumps it for Jody's sale purposes....

-------------
https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206
http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot
78 SkiTiq


Posted By: KerrLakeFish
Date Posted: September-25-2014 at 7:08pm
Hi,

Do you have the transmission mounts for a 82 Ski Nautique?

Ken

919-210-0401

-------------
1982 Ski Nautique
1987 Fish Nautique


Posted By: Fl Inboards
Date Posted: October-03-2014 at 1:34pm
Originally posted by Fl Inboards Fl Inboards wrote:


Absolutely Free 1979 Ski Nautique (Hull only). I will haul as far north as Valley Alabama next weekend on my flatbed. Again this is hull only.....No underwater gear, no drive train....no nothin!!! Free or next Thursday I haul it to the landfill here in Bay county.

Yes I got the e-mails about the carpet overlay, the overlay is nice and no i will not take less than my advertised price plus shipping.
Steve had asked me about this a year ago so Steve has first dibs on the carpet.

Cheers!




Now resides as a garden bar and and ornament at a private ski site in Alabama!!
will show updates next time through the area.

-------------
Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.




1993 Shamrock "fat" 20. 2008 Nautique 196 5.0


Posted By: TRBenj
Date Posted: October-03-2014 at 2:33pm
Originally posted by TRBenj TRBenj wrote:

Jody, still awaiting a response on the carpet overlay- sent you a pm on wed 9/17. Just FYI!


Posted By: Treybizttu
Date Posted: October-03-2014 at 3:06pm
PM sent


Posted By: Fl Inboards
Date Posted: November-11-2014 at 4:57pm
Originally posted by Fl Inboards Fl Inboards wrote:

2014 Fall Florida Inboards clean out.
1. Fish Nautique rudder 1977   $75
2. Malibu Fins 1990           $75
3. Malibu Pylon. Needs polish $100
4. Fish Nautique Strut needs bushing $50
5. Nautique Rudder port SN/196       $40
6. 1" Shaft coupling "New" Brass     $40
7. Top mount Bell housing "Chris Craft" $75
8. Ford PCM Engine mounts 1:1 trans   $35
8. Chevy SBC PCM Engine mounts        $35
9. Deck mount wide Mirror (Truck Style) $40
10. Fuel filter assy needs cartridge    $40
11. 1" brass packing glands (2)        $15 ea


Not pictured:
12. BBC Oval port Cast Iron intake Holley bolt pattern $125
13. Ford 351 GT-40 heads $500
14. New never mounted 351/302 PCM Bell housing $300
15. 2 Recently refurbed 14X16 OJ Propellers. Very nice $175 each
16. 6 liter PCM Exhaust manifolds and risers $500 New condition
17. 5.7/5.0 PCM Exhaust manifolds and risers New condition $500

Thought I would give you all first pickins before it goes to ebay, Swap meet or scrap. All prices OBO and does not include shipping.

Fall is for Skiing!!

Jody


Just updated this list!
Nothing personal to anybody here but please do not ask for shipping quote! if shipping is a deal breaker then you cant afford the cheap part!

-------------
Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.




1993 Shamrock "fat" 20. 2008 Nautique 196 5.0


Posted By: TRBenj
Date Posted: November-11-2014 at 5:33pm
Nothing personal, but it seems obvious to me that the cost of the part has little to nothing to do with what it costs to ship heavy and/or bulky items! If shipping were inconsequential, it'd be included in the asking price, right? Ballpark numbers work- hard to guess on weight/size from here!


Posted By: eyefish
Date Posted: June-22-2015 at 9:10am
Hi I am looking for a strut for a fish nautique. If you still have that one please please contact me



Print Page | Close Window