Fuel gauge stoped working
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=34583
Printed Date: November-17-2024 at 11:32am
Topic: Fuel gauge stoped working
Posted By: skilime80
Subject: Fuel gauge stoped working
Date Posted: September-08-2014 at 4:58am
I checked the gauge and the wires, I think the Float dropped to the bottom of tank, how do I fix it, I hope I don't have to pull the tank! 
|
Replies:
Posted By: Orlando76
Date Posted: September-08-2014 at 7:48am
| Luckily pulling the tank is a 5 minute job. Take the back divider off, you might be able to see if a wire fell off sending unit without pulling tank as well as take an ohm reading. |
Posted By: leetudor
Date Posted: September-08-2014 at 10:19am
| Take the positive wire off the sending unit and touch to ground with the key on, if gauge pegs out it is the sending unit. |
Posted By: CrazyCanuck
Date Posted: September-09-2014 at 9:45pm
|
You can rebuild the sending unit. I did mine, but my float was okay. It was a broken wire. However you might find a float out there. and then just adjust it. Might be cheaper than replacing the whole unit. ------------- https://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcRtW3vJrMHLdqBzndt9VX3oOpBuRopGlzKq9Ea7pAO7wnTuoD8E8g |