Removing exhust manifolds
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=34692
Printed Date: October-08-2024 at 6:39am
Topic: Removing exhust manifolds
Posted By: captbob626
Subject: Removing exhust manifolds
Date Posted: September-26-2014 at 11:05pm
Going to put new exhaust gaskets on my 351. Bolts are star 12 pt. any suggestions before I start. I was going to use pb blaster let soak a few days, then try impact gun.
-------------
Bob Meimbresse
|
Replies:
Posted By: OverMyHead
Date Posted: September-27-2014 at 1:01am
I just replaced mine. I used a 50/50 mix of acetone and auto transmission fluid as a penetrant a day before. Before I tried to turn them I put a socket drive on an extension and gave each a smack. They came out easily with just a hand ratchet wrench.
-------------
For thousands of years men have felt the irresistible urge to go to sea, and many of them died. Things got better after they invented boats.
1987 Ski Nautique
|
|