Almost complete perfect pass.
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=35327
Printed Date: November-30-2024 at 7:44pm
Topic: Almost complete perfect pass.
Posted By: Fl Inboards
Subject: Almost complete perfect pass.
Date Posted: January-28-2015 at 4:33pm
|
For Sale almost complete Perfect Pass system Missing is the hull harness to stepper motor.This is a 6.2 Single line system. MasterCraft logo Display.Will work on Carb and GT-40 applications. Paddle wheel assy and housing not included Parts include: Stepper motor and bracket assy, also new actuator cable. Master module Tach conditioning module. power wire Single line display with new black bezel. Price $275 plus the ride. 850 215 1996  ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Replies:
Posted By: gpax
Date Posted: January-30-2015 at 4:38pm
| Very interested. PM me or email at gregpaxton@yahoo.com |
Posted By: td_in_nc
Date Posted: February-04-2015 at 9:08pm
|
Jody, Will this work on an Indmar 5.7 EFI? I am looking at getting a constant speed control for wakeboarding. I am assuming this would work if I install a paddlewheel? Thanks Tom 919-946-5897 |
Posted By: Fl Inboards
Date Posted: February-05-2015 at 9:12am
|
Tom yes it will work on a 5.7 efi. what engine you have will dictate what servo to the throttle body control cable you will need. parts needed from perfect pass to make this system work. Servo Motor Power Cable (Master Module to Servo) ST300 Paddle Wheel Kit (Complete with hull housing) ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |