Wiring harness for 1988 2001
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=35387
Printed Date: November-17-2024 at 8:19am
Topic: Wiring harness for 1988 2001
Posted By: mpotts12
Subject: Wiring harness for 1988 2001
Date Posted: February-09-2015 at 10:50pm
| I need the wiring harness for a 1988 2001 ski Nautique. I just need the one that connects everything in the dashboard and control panel..... Gauges, switches ect... Everything up to that point is fine, but from the pigtail that connects everything in the dashboard and control panel has been butchered. Any help would be appreciated. |
Replies:
Posted By: phatsat67
Date Posted: February-10-2015 at 9:21am
|
Most of that was wired by CC. The only thing that is available is the pig tail end that comes out of the 8 pin connectors and I believe only one of those is still available. ------------- |
Posted By: 8122pbrainard
Date Posted: February-10-2015 at 9:37am
|
Alfred, Welcome to CCfan. How about some pictures as well as more info on the boat? A diary entry would be great too. You say everything is fine except under the dash. Consider cleaning it up. Many here have and gone with terminal strips to eliminate daisy chaining. Also using adhesive lined heat shrink crimp on connectors is always best. Another upgrade is running heavier gauge wire up the dash. This eliminated the voltage drop many encounter. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: phatsat67
Date Posted: February-10-2015 at 10:26am
|
Pete will point you in the right direction. The quality of the wiring was ok but not usually good enough to stand up to 30 years of corrosion, vibration, and unqualified mechanics changing things. It is pretty simple just will take you some time. Doing a full rewire is probably your best option for success in the long run. ------------- |
Posted By: 8122pbrainard
Date Posted: February-10-2015 at 12:12pm
Correct! They didn't even use tinned wire!  Alfred, I didn't mention the tinned wire. It is recommended as well. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
phatsat67 wrote:Posted By: mpotts12
Date Posted: February-10-2015 at 4:56pm
| Thanks guys! I'll let you know how it turns out |
Posted By: phatsat67
Date Posted: February-10-2015 at 5:52pm
Pete, we just did a complete dash rewire on a Footer. Much better results. Mine operates pretty well but next winter when I can afford that new dash panel it will be all new and probably quite revised when I get in there. ------------- |
Posted By: 8122pbrainard
Date Posted: February-10-2015 at 7:20pm
And don't forget:
 ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: lakedog55
Date Posted: February-13-2015 at 6:20pm
|
I have one, but they are interesting to make sense out of. all daisy chained together, This one was new probably ten years ago, Let me know if interested Mike ------------- Lakedog55 |
Posted By: mpotts12
Date Posted: February-13-2015 at 6:33pm
| Definitely interested.... At work right now but I'll get back to you later. Thanks |