1987 Martinique whole or part out.
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=35392
Printed Date: November-30-2024 at 8:08pm
Topic: 1987 Martinique whole or part out.
Posted By: Fl Inboards
Subject: 1987 Martinique whole or part out.
Date Posted: February-10-2015 at 3:26pm
|
Parting out 1987 Martinique OB. Hull Gel is cracked everywhere, stringers NAFF. Will sell boat complete as is no trailer, or part out. This currently is a complete boat. 850 215 1996    ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Replies:
Posted By: Fl Inboards
Date Posted: February-11-2015 at 11:25am
|
Going to start the dismantle of this boat today. pulling the running RR 351-w and transmission today. Again this is a complete running boat with many parts including gauges,underwater gear, instruments and a complete teak trim package. A nice platform and brackets. Will check the condition of the engine and trans after it gets pulled from the boat. ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: Fl Inboards
Date Posted: February-11-2015 at 6:44pm
|
We just started the engine on a crate!! Wow what a great running engine trans combination. we did use a new carb as the carb on the engine was naff and automotive. What it needs is a tune up (cap rotor and plugs), alternator, carb, belts and impeller. I am going to pressure wash it and pickle it. Shipping anywhere on the east coast will run between $350-$500. Great running 351 pleasure craft right rotation engine. ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: 85454Nautique
Date Posted: February-12-2015 at 1:15am
|
I'm interested in the driver's seat base, speedos and steering wheel ------------- 1985 Ski Nautique 454 Project Boat |
Posted By: Fl Inboards
Date Posted: February-12-2015 at 1:25pm
 Great running RR PCM and Borg transmission. probably selling too cheep but what the heck it's a new year!!! ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: Fl Inboards
Date Posted: February-12-2015 at 1:50pm
|
Do you have a martinique? These seat bases are quite a bit different then that of a smaller ski or mustang as they are basically a box with drawer and a set of seat slides and seat set atop. this is a factory set up butt??? and as for the Speedometer (as in one) again it is a recessed unit. I am keeping the Big "T" steering assembly, the MV control and the gauges for another boat and engine test stand. Lot's of nice teak trim in this boat and.... the Platform and brackets are real nice. Boat Carcass going to the land fill next week. Shaft log, 41" shaft and coupler, rudder and port, steering arm, strut, Hull wire harness, teak trim, rub rail with rope insert,windshield,platform, pylon, bow rail and a whole lot of Cool hardware and hinges. all for sale. jody ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: Orlando76
Date Posted: February-12-2015 at 2:06pm
| Well poo, what you're keeping I was considering. Is the rudder the same as my '76 SN, what's that, 11a? |
Posted By: 85454Nautique
Date Posted: February-12-2015 at 2:06pm
|
Oh I thought they were the same scratch those items, still interested in the Steering wheel though if it will fit my 85 Ski Nautique EDIT Whoops didn't read your entire post oh well the Sea Ray wheel will work for the time being. ------------- 1985 Ski Nautique 454 Project Boat |
Posted By: Orlando76
Date Posted: February-12-2015 at 2:22pm
| Oh, what about pitot? |
Posted By: 85454Nautique
Date Posted: February-12-2015 at 2:30pm
|
Surprisingly I don't heed those ------------- 1985 Ski Nautique 454 Project Boat |
Posted By: Fl Inboards
Date Posted: February-12-2015 at 3:38pm
|
Pit-tot's are of the junk teleflex type. and the steering wheel is available and is in decent condition. I am keeping the big "T" helm and cable. The rudder looks to be the same as a 11-A like the one I pulled out of my 82 SN. ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: Fl Inboards
Date Posted: February-17-2015 at 5:45pm
    hull nearing it's demise! these are the parts off the boat for sale. PM me for prices! Thanks Jody ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: sberard5
Date Posted: February-17-2015 at 8:07pm
|
How much for the engine cover hinges? Shipped to 04030. Thanks |
Posted By: racingnc
Date Posted: February-17-2015 at 9:12pm
| I need a whole slew of parts for my 1986 Martinque. Gauge panel with gauges and wire harness rudder steering cable and a few more part pm me with prices please |
Posted By: Fl Inboards
Date Posted: February-19-2015 at 11:14am
|
Please Contact me through the PM feature or my email for parts inquiry. Or floridainboards@msn.com. Taking my annual trip down under for the Moomba so orders not made and paid for by 2/20/2015 will not go out until after March 12 Platform sold however the ss brackets are available. Big "T" Steering and cable will sell but not going to sell cheep. MV control is very nice again not going to give it away. mufflers cleaned up nice, all underwater gear available. Gauge panel and gauge's have been re-purposed and is now the gauge panel for my new engine run stand/fixture. Reminder I share a % of my sales with this web site and price's for these parts include a 50% for that donation with purchaser. Thank You. Jody ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: asaxet
Date Posted: February-19-2015 at 2:40pm
| Looking for swiw platform brackets.. and mybe the pylon... Thanks Art |
Posted By: Fl Inboards
Date Posted: February-22-2015 at 11:33pm
|
Rudder and port, strut and shaft sold. ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |