350 engine swap dog clutch issue
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=35540
Printed Date: May-19-2024 at 4:07pm
Topic: 350 engine swap dog clutch issue
Posted By: macho 350
Subject: 350 engine swap dog clutch issue
Date Posted: March-14-2015 at 2:25am
|
Hi thanks for letting me join i have just taken my older 350 out and have a vortec 350 crate motor which came out of a jet boat i want to put in my engine faces backwards and the drive is run off the timing cover end problem is the crank after taking the dog clutch off has a woodruff key and two round pins which go into 2 more groves machined into the crank the new engine only has the one for the key not the other two ,any ideas or thoughts thanks
|
Replies:
Posted By: 8122pbrainard
Date Posted: March-14-2015 at 8:37am
Pull the crank and machine the needed groves for the pins. What type of boat are you repowering? I don't know of any CC's that ran dog clutches. From way back they ether had manual and then hydraulic trans's.
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
|