What Tower was on my boat
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=35549
Printed Date: November-24-2024 at 2:27pm
Topic: What Tower was on my boat
Posted By: cueball
Subject: What Tower was on my boat
Date Posted: March-16-2015 at 7:28am
|
So I was hoping someone on here might know what tower was installed on my boat.. The front mount has 4 holes that are 2" apart in all directions/square  The rear mount only has 2 holes and are 3" apart.  And from center of front mount to center of rear mount is 40"  I am trying to find the brand of the tower that was on here so I can purchase the same tower....I don't want to drill more holes in my boat. Thanks Shawn ------------- Shawn 1986 SN 2001 |
Replies:
Posted By: Air206
Date Posted: March-16-2015 at 9:11am
|
Those are awfully small (and few) holes for a tower...... you know it was a tower and not some rigid bimini system? ------------- https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206 http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot 78 SkiTiq |
Posted By: cueball
Date Posted: March-16-2015 at 9:50am
|
Not 100% sure..I got this project from a guy who got this project...the previous owner told me it was a Monster Tower...but their hardware dosn't match up. I dont don't think they are for a bimini, I got holes for them too. ------------- Shawn 1986 SN 2001 |
Posted By: Air206
Date Posted: March-16-2015 at 10:00am
|
Just put the tower feet over the holes and move on (check with tower company and make sure spacing is appropriate and eyeball it yourself too).... Some towers look spread too far and others look too squashed. ------------- https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206 http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot 78 SkiTiq |
Posted By: Tim D
Date Posted: March-16-2015 at 10:46pm
|
I bet if you find another tower, same brand, same model that was on there and you place it on the boat in won't line up to the holes. Doubt they're that precise. ------------- Tim D |
Posted By: JoeinNY
Date Posted: March-17-2015 at 6:08am
Tim is right they are not that precise, but they also aren't too hard to bend into shape either. However all most all the universal towers have changed a bit in the mountings over the years - I would pick what is cheap and appeals to you and then move on with your life - whats a few more holes anyway. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1477 - 1983 Ski Nautique 2001 1967 Mustang 302 "Decoy" http://www.youtube.com/watch?v=cO5MkcBXBBs - Holeshot Video |
Tim D wrote: