steering pivot ball
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=35828
Printed Date: November-17-2024 at 6:00am
Topic: steering pivot ball
Posted By: DayTony
Subject: steering pivot ball
Date Posted: April-21-2015 at 2:39pm
I think thats what it is called, there's a ball mounted on the stringer that the clamp for the steering at the rudder end of cable. Mine is ready to fail.
is this a standard interchangeable part between SNS, BFN, FN, etc?
i'll post pictures later if im not clear enough. looks like a fairly cheap part (relatively speaking of course) that i should be able to buy through any supplier.
-------------
1988 Barefoot nautique-454
|
Replies:
Posted By: TRBenj
Date Posted: April-21-2015 at 2:57pm
|
I believe that is a teleflex part (I have seen it referred to as the clamp block), as it works in conjunction with their cable and clamp tube.
|
Posted By: Riley
Date Posted: April-21-2015 at 3:08pm
|
They're about $96+. You can probably find a used one easy enough.
|
Posted By: DayTony
Date Posted: April-21-2015 at 3:14pm
Oh i see, they are a full set. I will have to check online now that i know what they are called. i was searching for ball joint or pivot joint.thanks! my actual clamp is in good shape its just the mount on the stinger that is rotted. constant salt water sitting in the bilge will do that.
-------------
1988 Barefoot nautique-454
|
Posted By: LeftFieldEngineering
Date Posted: April-21-2015 at 3:14pm
|
I may have one on my parts boat. Let me know and I'll dig it out. Probably only be 1-2 days in the mail since we're both in MA.
|
|