71 Barracuda for sale (project)
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=36253
Printed Date: November-27-2024 at 2:45pm
Topic: 71 Barracuda for sale (project)
Posted By: Nova Scotia
Subject: 71 Barracuda for sale (project)
Date Posted: June-06-2015 at 10:41pm
I have a 71 Correct Craft Barracuda for sale that is not complete. I bought this boat thinking that I was going to fix it up but ended up buying another boat. The guy I bought from had boat running but the exhaust manifolds cracked and salt water got all into engine and then he let it sit so I knew when I got boat I knew the engine was bad so I pulled engine and bought rebuilt chrysler 318 from a boat dealer in ontario canada. The floor was just pieces of plywood screwed down to stringers so I pulled that up and still have the pieces. I had a boat builder here come and look at boat and he said the stringers are good but should have new floor put in. The boat comes with everything u see here and more, hull, trailer, rebuilt Chrysler 318 with exhaust manifolds and velvet drive, two front seats, rear bench, side panels with carpet and carpet for floor extra velvet drive I pulled off old engine, plus a bunch of extra parts i pulled off old engine, starter, oil pan, etc. Rebuilt engine is still in crate. I am not expert but this is what I know about boat so if there are any questions I will do my best to answer them. I am located just outside of Halifax, Nova Scotia Canada. 
|
Replies:
Posted By: Nova Scotia
Date Posted: June-06-2015 at 10:44pm
|
I have lots of more pictures but finding it hard to upload so send me message and i will email them to you! |
Posted By: larsontkmm
Date Posted: June-14-2015 at 3:50pm
|
Would you be willing to sell the Pylon? I am trying to find one for my 1974 southwind 20. ------------- |
Posted By: Nova Scotia
Date Posted: June-14-2015 at 4:18pm
| Didn't really want to start taking apart cause if someone wants boat they got to want as many pieces as possible. How much are u willing to pay? Thanks |
Posted By: larsontkmm
Date Posted: June-15-2015 at 12:35am
|
Do you know if it would fit or be the correct height for a Southwind 20? What is the total length? ------------- |
Posted By: larsontkmm
Date Posted: June-18-2015 at 12:49am
|
Is the total length 52"? ------------- |
Posted By: Nova Scotia
Date Posted: June-18-2015 at 11:39am
| I have had a little interest in the boat so I am going to keep it all together for now, sorry |
Posted By: larsontkmm
Date Posted: June-23-2015 at 8:48am
|
Very good. ------------- |
Posted By: larsontkmm
Date Posted: September-30-2015 at 10:55am
|
Did it Sell? ------------- |
Posted By: Nova Scotia
Date Posted: October-09-2015 at 8:30pm
| Sorry I sold ski pole, and parting out the rest, let me know what u need! |