Wet Sanding Questions
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=37141
Printed Date: November-17-2024 at 1:35am
Topic: Wet Sanding Questions
Posted By: 91NaughtyQ
Subject: Wet Sanding Questions
Date Posted: August-22-2015 at 4:40pm
I am doing my first wet sanding of the boat since owning it for a month. I would say light to medium oxidation but otherwise the gel coat is good.
My main question is how good should it be after just wet sanding? I have done one side and it shines but it is still "cloudy" underneath the shine.. (I might be on the over critical side when looking at it). I just don't know how it should be before proceeding.
. I plan to compound, Polish, and Wax next.
Any tips are appreciated.
|
Replies:
Posted By: 91NaughtyQ
Date Posted: August-22-2015 at 4:51pm
|
I went to the FAQ section and found a ton of good info. If you guys have other advice send it on, otherwise I will use the info I found in the FAQ.
|
Posted By: 91NaughtyQ
Date Posted: August-22-2015 at 4:52pm
|
One more thing. How do I know when to change to a new sheet of sand paper?
|
Posted By: 8122pbrainard
Date Posted: August-24-2015 at 9:42pm
Gary,
You'll notice the paper not cutting anymore.
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
Posted By: 91NaughtyQ
Date Posted: August-24-2015 at 10:19pm
|