312 Interceptor timing marks
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Off Topic
Forum Discription: Anything non-Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=37380
Printed Date: January-22-2025 at 8:09pm
Topic: 312 Interceptor timing marks
Posted By: MourningWood
Subject: 312 Interceptor timing marks
Date Posted: September-20-2015 at 9:25pm
Installing cam in 312 with clockwise rotation.....utilizing direct gears instead of timing chain set.
Need info on how to align the gear/gear marks. Thanks
|
Replies:
Posted By: 8122pbrainard
Date Posted: September-20-2015 at 9:49pm
Aren't there dimples on gears? They should line up. Where did you get the gears? They would be able to tell you for sure.
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
Posted By: MourningWood
Date Posted: September-21-2015 at 4:42pm
|
Yes, there are marks. but I can't get them to "meet" and have both valves closed at #1 tdc on firing stroke. They are the original gears. Was hoping someone out there had a photo ( lost mine) or other reliable reference. Thanks.
|
Posted By: Riley
Date Posted: September-21-2015 at 5:01pm
|
Call boat dr.. The manual states how to line them up with a timing chain, but not gears..
|
|