Removing Driver's Seat--95SN
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=37424
Printed Date: November-16-2024 at 11:53pm
Topic: Removing Driver's Seat--95SN
Posted By: SteveHookEm
Subject: Removing Driver's Seat--95SN
Date Posted: September-27-2015 at 9:13pm
|
I have a seam splitting in my driver's seat. Instead of taking the entire boat in, I was thinking about removing the driver's seat and taking it to be repaired outside the boat. How does the driver's seat come out? Do I take the entire base from the floor or can I take just the seat/back off separately? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=7890" rel="nofollow - My 95 Ski Nautique Diary |
Replies:
Posted By: JPASS
Date Posted: September-27-2015 at 9:44pm
|
Our '92 had four bolts under the seat cushion that attached it to the seat racks. Have you tried lifting the cushion to see if there are any bolts? We didn't have to remove the base to remove the seat. ------------- '92 Correctcraft Ski Nautique |
Posted By: 8122pbrainard
Date Posted: September-27-2015 at 9:48pm
Maybe that "pro" sound system installer you have can help!   ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
SteveHookEm wrote:Posted By: Bri892001
Date Posted: October-09-2015 at 12:01pm
|
Did you ever figure this out. Looking to replace my driver's seat skin this coming spring as well. Figure it's similar on a 93 and a 95, and a lot of other years as well. |
Posted By: s_kelley2000
Date Posted: October-09-2015 at 1:57pm
JPASS is correct. On my 99, lift the seat bottom and undo the 4 nuts that hold the seat to the seat tracks. If I remember correctly, they are square head bolts that prevent them from spinning inside the track as you take the nuts off on the top side. If your seat does not slide smoothly then this is a good time to either service or replace the seat tracks. Christine's Marine had the best price on them when I replaced mine last summer. To remove the tracks, there is a hole in the middle of the black base. Use that to get a wrench on the backside while you loosen from the top.
|
Posted By: Gary S
Date Posted: October-09-2015 at 7:05pm
|
Thanks you two,I need to take mine out next spring also. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: Bri892001
Date Posted: October-09-2015 at 8:32pm
| Thanks guys! |