1975 san juan flybridge
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=37441
Printed Date: June-26-2024 at 9:40am
Topic: 1975 san juan flybridge
Posted By: mikeg1
Subject: 1975 san juan flybridge
Date Posted: September-29-2015 at 7:27pm
| does anyone know where I can find exhaust risers for a 1975 san juan with twin 302 gt engines. I have been told they are escort exhaust. |
Replies:
Posted By: 8122pbrainard
Date Posted: September-29-2015 at 7:41pm
|
Mike, Welcome to CCfan. We always ask for pictures and considering how unusual your San Juan is, we demand them!!  You have a couple choices for exhaust manifolds. Don't worry about them being Escorts. The 302 is the key. PCM bought Escort and produced the Escort for a couple years. I have one (302) in my Tique. They used the log style and PCM are the riser type. Look at PCM manifolds or Barr. Both will require some exhaust hose work. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: mikeg1
Date Posted: September-29-2015 at 11:26pm
| have tried pcm and barr without totally replacing all manifolds and risers they have nothing similar. |
Posted By: Gary S
Date Posted: September-30-2015 at 12:06am
|
Chances of finding 2 complete sets are slim to none. You'll need to replace everything as Pete insinuated. If your in salt it would be best anyway. Time will tell if I made the right choice   ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: Pjvoegerl
Date Posted: March-24-2016 at 11:45pm
|
Do you still have this boat? I have a 72 with a flybridge and a single 360. Looking for some others 8128279560 Thanks paul |
Posted By: DrCC
Date Posted: March-25-2016 at 1:04am
|
There should be another F/B SanJuan around somewhere w/ twin 250ci MerC I/O's. central MO. There's a lot of motion sitting atop a F/B - SJ. |
Posted By: Mountain Man
Date Posted: April-01-2016 at 3:56pm
|
Gary: Those sure are pretty! Steve |
Posted By: Gary S
Date Posted: April-01-2016 at 4:37pm
|
Thanks Steve. So far so good on their use. I was disappointed in their fitting, each one needed about 5 tries. It seems when the end cylinders were welded they warped a little. Other problems were that the bolt would seat on the weld of the flange to the tube which then required grinding. Would have been quite expensive to have had it done. I should have fitted them to a cylinder head on the bench when I had time rather than doing it on the boat! ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |