pylon
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=37527
Printed Date: November-16-2024 at 10:27pm
Topic: pylon
Posted By: clr517
Subject: pylon
Date Posted: October-16-2015 at 10:57am
| looking for 70s era pylon. |
Replies:
Posted By: Riley
Date Posted: October-16-2015 at 11:41am
We have this one out of a '74 Skier. It is in good condition. The ring and finger have very good chrome. $250 plus shipping. It is a straight pylon and not curved. 
|
Posted By: Hollywood
Date Posted: October-16-2015 at 11:49am
| pylons changed quite significantly in the mid 70s, also varied from model to model. you might want to be specific about what boat you're trying to fit it in. |
Posted By: clr517
Date Posted: October-16-2015 at 12:31pm
| I have a 72 mustang |
Posted By: clr517
Date Posted: October-16-2015 at 12:41pm
| If it will fit I'll take it |
Posted By: Riley
Date Posted: October-16-2015 at 5:19pm
| TimB or any other Mustang people know if this is the correct pylon for a '72 Mustang? |
Posted By: Chevy350
Date Posted: October-16-2015 at 5:37pm
|
The mustang pylon is slanted back a little. ------------- 1972 Mustang |
Posted By: TRBenj
Date Posted: October-16-2015 at 9:16pm
| It probably won't play nicely with the bench seat but otherwise it would install in place. It's not quite the original style, that smaller diameter aluminum and later ring/finger was used '73-75. The earlier pylons were steel with a different ring/finger style. |
Posted By: Riley
Date Posted: October-16-2015 at 9:53pm
| We've got another from a 68 or 69. Were they still using those in 72? It is a steel pylon. |
Posted By: TRBenj
Date Posted: October-16-2015 at 10:15pm
| The 68-70 pylons were nearly the same as the 71-72 version... Difference being the bend (68-70 is straight). |
Posted By: Riley
Date Posted: October-16-2015 at 10:43pm
| Sorry Casey, keep looking. They do pop up here. |
Posted By: clr517
Date Posted: October-17-2015 at 12:00am
| thanks riley for the help.ill keep looking. |
Posted By: ScottZ
Date Posted: November-16-2015 at 6:48am
 This is what a 72 Mustang that I am about to restore has in it. I have never seen one like this one. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: ScottZ
Date Posted: November-16-2015 at 6:49am
 I have this steel one that is straight that came out of a late 60's Barracuda. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: ScottZ
Date Posted: November-16-2015 at 6:53am
 Here is a better view of the top half of the tow bar. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |