225 slant six engine
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=37558
Printed Date: November-16-2024 at 10:56pm
Topic: 225 slant six engine
Posted By: route66
Subject: 225 slant six engine
Date Posted: October-22-2015 at 12:09am
| can anyone out there tell me anything about the slant six motor. i am new with this boat and welcome any info, thanks. wayne |
Replies:
Posted By: storm34
Date Posted: October-22-2015 at 10:54pm
|
Wayne, what are you wanting to know? Any chance you picked up the Skier listed in the Ozarks? ------------- |
Posted By: 8122pbrainard
Date Posted: October-23-2015 at 1:00pm
|
Chris, Didn't you have a Skier with the slant 6? Refresh my memory! What happened to it? ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: 93/70 ccpb
Date Posted: October-25-2015 at 2:23pm
|
had one in my 1970 correct craft swinger.17 ft same a southwind hull deep v..top speed around 35 mph.was a good engine as long as i had it.easy to work on . ------------- what you dont want to hear from jbear and bill.you cant get in the boat till you get your minute,and they throw you back in water! |
Posted By: 93/70 ccpb
Date Posted: October-25-2015 at 2:25pm
|
pm me i may have a engine manual and a tachometer just for chrysler six cylinder. ------------- what you dont want to hear from jbear and bill.you cant get in the boat till you get your minute,and they throw you back in water! |
Posted By: route66
Date Posted: October-25-2015 at 11:36pm
| thanks, interested in your manual/tach |
Posted By: storm34
Date Posted: October-26-2015 at 1:11am
It's still sitting out in the barn needing the deck replaced or fixed, just haven't had time to dedicate to the project. It'll make a great first boat for Maddox and I to restore together! ------------- |
8122pbrainard wrote: