Print Page | Close Window

silencer/muffler Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=38126 Printed Date: November-16-2024 at 8:58pm Topic: silencer/muffler Posted By: shierh Subject: silencer/muffler Date Posted: February-18-2016 at 12:52am 1983 nautique im installing exhaust.   Reusing the old silencers and need to know about direction of flow. baffle on one end is closer than other end and is bullet shape with inlet/discharge down im assuming.    Replies: Posted By: Hollywood Date Posted: February-18-2016 at 1:30am Baffles should hang from 12 o clock. I guess I would put them toward the rear given a choice. Posted By: 8122pbrainard Date Posted: February-18-2016 at 6:33am I agree with Kevin's logic. With the baffle towards the exhaust end, there's more area for the water to slosh around muffling the exhaust. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < Posted By: shierh Date Posted: February-22-2016 at 12:03pm I called Centek and they verified that they made these mufflers for correctcraft and verified the direction of flow.    Convex baffle goes towards engine and concave baffle is the discharge side.    I had it right the first time but changed them around over the weekend. Not a hard thing to fix.

Print Page | Close Window