Rigging an Audio System
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Off Topic
Forum Discription: Anything non-Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=38293
Printed Date: January-23-2025 at 2:03am
Topic: Rigging an Audio System
Posted By: Silver15
Subject: Rigging an Audio System
Date Posted: March-20-2016 at 5:29pm
Recently at the River Ruckus, I purchased a sweet Clarion CMS2 head unit. I want to install it on my fishing boat in the most minimally intrusive way possible. (Boat was my grandfathers and is/was very expensive so I do not want to drill big holes or at least as few as possible.) My plan is to mount 4 tower speakers. Two to the inside of the poling platform supports and two to the inside of the seat pedestals forward of the console. I have never built a high quality audio system so was wanting some feedback from those of you who have. Mainly, what kind of speakers should I run. Amp... do I need one? What kind? Any better suggestions to rig up a system that requires the least amount of drilling possible but also looks clean/neat and sounds good?    ------------- 2000 Air/Sport 1978 T16 |
Replies:
Posted By: Silver15
Date Posted: March-20-2016 at 5:37pm
Also, I think I want to mount the display on this black face plate on the console and the receiver itself beneath the console.   ------------- 2000 Air/Sport 1978 T16 |